Products are listed alphabetically.

Page 1 of 2    Next page »

1. AUXILIARY PHONE BELL (MODEL 349) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Auxiliary telephone bell, produces a traditional telephone ring at 88 decibels. Plugs into modular telephone jack or uses adapter to plug both bell and phone into the same jack. On-off switch. 4.5 by 2.75 by 1. 75 inches. 7 foot cord....[More Information]
   
   
2. CA-100 VISUAL PHONE ALERT --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The Ameriphone CA-100 is a flashing light telephone signal that signals incoming phone calls by flashing an attached lamp or light on and off. This device works whether the lamp is in the on or off position, and has a lamp control switch....[More Information]
   
   
3. CALL ALERT PHONE SIGNALER (MODEL CA-100) --- DISCONTINUED. (Verified 08/2005)RETAINED IN DATABASE FOR REFERENCE. --- Call Alert Phone Signaler, Model CA-100, is a telephone signal device designed to provide a visual indication of an incoming phone or text telephone (TDD) call for individuals who are deaf. The device is plugged into a lamp. When a call is received, Call Alert causes the lamp to flash on and off. A lamp using a bulb of up to 300 watts is required....[More Information]
   
   
4. CONCEPT I VISUAL ALERTING SYSTEM AND BURGLAR ALARM --- DISCONTINUED. (Verified 04/93) RETAINED IN DATABASE FOR REFERENCE. --- Signalling system that alerts you by flashing or turning on lights when door knock, phone ringing or smoke alarm sounding. Consists of two parts; sonic transponder attaches to inside of door or window with double sided tape that is included which detects vibrations caused by knock on door or window tampering. It sends loud sonic beep tone to sonic receiver (plugged into any outlet and lamp is plugged into it). Receiver ha...[More Information]
   
   
5. DELUXE VARI TONE RINGERS --- DISCONTINUED. (Verified 06/2006) RETAINED IN DATABASE FOR REFERENCE. --- The Vari-Tone Ringers are signal amplifiers designed to alter a telephone's signal to a clear, distinct pitch to assist persons with hearing disabilities hear the phone. The deluxe models feature a standard 6-foot hard wired line cord and an integral modular jack for easy installation. There are three audio frequency ranges, each of which can be further tuned by turning an exposed knurled knob. The CPE Vari-Tone Ringers...[More Information]
   
   
6. DOORBELL AND TELEPHONE TRANSMITTER (MODEL DDT7T) --- DISCONTINUED. (Verified 07/93) RETAINED IN DATABASE FOR REFERENCE. --- Telephone and doorbell signal, remote control receiver has outlet and 2- way switch. Lamp or light bulb plugs into unit, light flashes on receiving signal....[More Information]
   
   
7. DOORBELL/TELEPHONE TRANSMITTER (MODEL DDT7) --- DISCONTINUED. (Verified 12/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Doorbell/Transmitter, Model DDT7, is a combination visual alerting signal system for the visually impaired. The system includes a doorbell button and a 18 feet of wire, when the doorbell is depressed or the telephone ring the transmitter emits a signal to the remote receiver. The lamp plugged into switched receptacle will flash. Separate flash codes exist for telephone and doorbell. A bed vibrator may also be plugged...[More Information]
   
   
8. EIGHT INCH GONG --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The eight inch gong telephone signal is a very loud bell in the bass frequency range for people with severe hearing problems. It can be heard over high level background noise and at a considerable distance....[More Information]
   
   
9. FONE FLASHER & FONE FLASHER 2 --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- The Fone Flasher is a telephone signaler designed to flash a lamp when the phone rings for individuals who are deaf or hard of hearing. The Fone Flasher lets you plug the lamp directly into it. The Fone Flasher 2 gives you a choice of how to be alerted to incoming calls: by its built in strobe flasher only, by the ringer only, or by both. This is for use in one room only. WARRANTY: One year limited....[More Information]
   
   
10. FONE FLASHER (MODELS 43-178 & 43-179) --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- Telephone signal flashes light when phone rings. Plug into AC outlet and modular phone jack, then plug desired lamp into flasher. For incandescent bulbs up to 300 watts....[More Information]
    
    
11. FONE-FLASHER (MODEL 43-177) --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- The Fone-Flasher is a telephone signal designed for use by individuals with hearing disabilities. The unit turns lamps on and off when the phone rings. The unit is designed to work with incandescent lamps up to 300 watts....[More Information]
    
    
12. FONE-FLASHER 2 --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- Telephone flasher lets user "see" phone ring by means of a built-in strobe light and ringer. Selectable modes. ....[More Information]
    
    
13. HIGH INTENSITY TELEPHONE RINGER (MODEL 347) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Loud telephone ringer emits 88 decibel ring. May be used in any room that has a telephone jack. Insert the 7 foot cord with its modular plug into any unused wall jack, or use the included adapter to plug both ringer and phone into one modular telephone wall jack. May be wall mounted or placed on a table. DIMENSIONS: 10 x 4 x 6 inches....[More Information]
    
    
14. LOUD BELL --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- The loud bell is much louder than a normal telephone bell, for signaling when telephone is ringing....[More Information]
    
    
15. MASTER RING INDICATOR WITH DOORBELL OPTION --- DISCONTINUED. (Verified 07/96) RETAINED IN DATABASE FOR REFERENCE. --- Operates same as telephone master ring indicator, but with long flash for phone and short flash for doorbell. Transmitter has suction attachment for telephone and wire connects to doorbell. Wiring options to leave chime connected or disconnected. Remote receivers available for other sections of house....[More Information]
    
    
16. MINI PHONE FLASHER (MODEL 43-179) --- DISCONTINUED. (Verified 08/2008) REAINED IN DATABASE FOR REFERENCE. --- Phone flasher designed for offices or other locations with many phones. Flasher shows which phone is ringing. Features seven foot modular cord and duplex jack. Powered by phone line. ....[More Information]
    
    
17. MODULAR RING SIGNALER (MODEL 358) --- DISCONTINUED. (Verified 03/2008) RETAINED IN DATABASE FOR REFERENCE. --- Telephone signal. Flashes light which is plugged into it every time the phone rings. Plug signaler into modular phone jack and into 110 volt AC outlet. Use included adapter to plug in both signaler and phone into same jack. Lamp (up to 300 watts) plugs into flasher. Measures 2.25 by 4 by 1.75 inches in beige plastic case. Seven foot cord. May activate remote receiver (number 354) which will flash lights in remote rooms ...[More Information]
    
    
18. OPTICEAR TRI FLASH --- DISCONTINUED. (Verified 05/2009) RETAINED IN DATABASE FOR REFERENCE. --- Signal system. Portable unit with a coil and a microphone sensitive to pushbutton doorbells, intercom systems, telephone rings, burglar alarms, door chimes and door knocks. For apartments and houses. An ordinary lamp is plugged into the device. The coil can be attached to the doorbell box, telephone or apartment intercom. The microphone can be used for doorknocks. When activated, will flash lamp. Up to 600 watts can be ...[More Information]
    
    
19. PCI SENTRY TELEPHONE MONITOR (MODEL AC100) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telephone monitor will alert you to all incoming calls. Easily connects to telephone system using a modular jack or pick-up-coil. When the telephone rings, the Monitor's household lamp, the Central Receiver and all Remote Lamp Modules will flash. No false alarms; it cannot be activated by external noises. Includes page feature. Lamp pushbutton allows use of household lamp for room lighting without missing any calls. Can be used with any n...[More Information]
    
    
20. PERSONAL PAGING SYSTEM --- DISCONTINUED. (Verified 7/2005) RETAINED IN DATABASE FOR REFERENCE. --- The Personal Paging System is a tactile pager designed for use by individuals with hearing disabilities. The system includes a telephone ring transmitter/pager which, when connected to the telephone, transmits the signal to the personal pager; a personal pager which vibrates when the telephone rings or when the personal pager is activated; and a dual battery charger....[More Information]
    
    
21. PHONE FLASHER (MODEL 22-114) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telephone signal for hearing impaired individuals. Connects to telephone and mounts on wall. No external power required; plugs directly into standard modular phone jacks. Ringing phone triggers repetitive flashing light. Flashes bright light when phone rings....[More Information]
    
    
22. PHONE RING SIGNALER (MODEL 353) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telephone signal flashes a light that is plugged into it every time the phone rings. Plugs into a 110 volt AC outlet. Place next to the phone; plug lamp (up to 300 watts) into signaler. Measures 4 3/8 by 2 3/8 by 1 1/4 inches in white plastic case. Options include remote receiver ( number 354) which may be used in other rooms. Must be used with phone with traditional ring....[More Information]
    
    
23. PHONE-TTY BABY CRY SIGNALLER (MODEL BC-1W) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Phone-TTY Baby Cry Signaller (model BC-1W) is a sound signaler designed to alert the hearing impaired user of a crying baby. The unit activates a lamp or vibrator that is plugged into it. The unit works whether or not the lamp is already on. The signaller features a highly sensitive, built in microphone that picks up sound up to 20 feet away. Microphone also has a sensitivity adjustment to monitor desired sou...[More Information]
    
    
24. PHONE-TTY R-1 WIRELESS RECEIVER --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Phone-TTY R-1 Wireless Receiver is a remote telephone signal designed for use with Telephone Ring Signalers TS-1W, LS-2W, Doorbell Signaler DS-2W, Baby Cry Signaler BC-1W and Smoke Alarm SM-1W ( see separate entries). The receiver features a wireless design which allows the device to be placed in a separate location from the Phone-TTY signal. The 110 volt AC receiver plugs into any standard socket. A light flashes w...[More Information]
    
    
25. PHONE-TTY TELEPHONE RING SIGNALER (MODEL TS-1) --- DISCONTINUED. (Verified 03/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Phone-TTY Telephone ring signaler (model TS-1) is a portable telephone signal designed to indicate that the telephone is ringing for the hearing impaired. Telephone calls are indicated by a lamp or vibrator that is plugged into the unit. The signaler features a built-in, telephone induction coil and 100 KHz wireless transmitter which is compatible with all other Phone TTY wireless systems. May be attached with se...[More Information]
    
    

Page 1 of 2    Next page »