Products are listed alphabetically.

Page 1 of 2    Next page »

1. BRAUN ALUMINUM TELESCOPING 6 FOOT RAMP. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telescoping ramp 6 feet long has 2 channels (tracks) that are set 4 feet apart. Mounts on either rear or side door. Easy to transport. Light weight aluminum construction. Stores either in horizontal or vertical position inside van. Wheel guide for safety....[More Information]
   
   
2. BRAUN TELESCOPING WHEELCHAIR RAMPS --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Braun telescoping wheelchair ramps are fabricated of highstrength aluminum. Lightweight. 65 inches long when retracted, 9 inches wide, and 98 inches long when extended. May be used at side or rear door of most vans....[More Information]
   
   
3. BRAUN WHEELCHAIR RAMPS --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- Folding wheelchair ramp measures 30 inches by 80 inches and is operated by attendant or companion. Side or rear installation with 3 bolts. 30 inch width conveniently accommodates most standard wheelchairs. Side rails (at 90 degree angle to ramp) minimize chair rolling of ramp. Metal grating construction is non skid and cleans easily. Center step cleats provide support and assist attendant in pushing wheelchair up ramp. M...[More Information]
   
   
4. CARGO RAMPS (MODEL 809) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Portable cargo ramp. Enables one person to load and unload vans and pickups using any standard hand truck. Designed to handle total load capacities up to 600 pounds. Size: 20 inches wide by 72 inches long. Weight 24 pounds....[More Information]
   
   
5. DO-IT-YOURSELF RAMP KIT --- DISCONTINUED. (Verified 10/96) RETAINED IN DATABASE FOR REFERENCE. --- The Ramp Systems Do-It-Yourself Ramp Kit is a ramp building kit for applications in public buildings, at curbs, on vans, or in homes, for people with limited mobility. When built to user specifications, these ramps are adjustable and reusable. Each kit contains an Illustrated Plan Guidebook, two aluminum ramp ends, and mounting hardware. Materials needed but not included in the kit are lumber, glue, wood screws, and tools...[More Information]
   
   
6. E-Z ACCESS (MODEL R3000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- Van ramp telescopes in 3 sections, up to 8 feet in length. Maximum load 750 pounds. Anodized aluminum with non-skid surface, side rails. Center panels lift out for storage....[More Information]
   
   
7. ECONO RAMP (MODELS W-12 & W-12XL) --- DISCONTINUED. (Verified 08/2005)RETAINED IN DATABASE FOR REFERENCE. --- Lightweight, steel, expanded metal ramp folds to a thickness of 10 inches for storage. Has load bearing capacity of 400 pounds. 4 bolt base installs in side or rear door of any conventional van. Features spring loaded double action release mechanism and a spring assisted folding mechanism. Available with an extended length of 88 inches (W- 12) or 108 inches (W-12XL)....[More Information]
   
   
8. EIGHT FOOT PORTABLE TELESCOPING WHEELCHAIR RAMP. --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Telescoping wheelchair ramp is eight foot long and folds to 5 or 6 feet for storage. For rear or side doors. Aluminum weatherproof construction. Stores inside van....[More Information]
   
   
9. EMC-ACCESS RAMPS (MODELS R3000, R1000, R2000, & R500) --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- EMC-ACCESS RAMPS are van and portable ramps designed for loading wheelchairs or scooters in full-size or minivans. All models are constructed of extruded aluminum and have a non- skid driving surface. Model R3000 is designed for use with scooters and powered wheelchairs, Model R1000 is designed for use with manual wheelchairs; and Model R2000 is designed for use with manual or lightweight electric wheelchairs. Model R500...[More Information]
   
   
10. EZ TRIFOLD SUITCASE RAMP (MODELS EZTF 6, EZTF 7, EZTF 8, & EZTF 10) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Trifold Suitcase Ramp is a portable van ramp designed to enable individuals who use scooters and wheelchairs to enter and exit vans and mini-vans. These ramps are made of aluminum, have non-skid surfaces, a three-fold design for compact portability, and a built-in carrying handle. DIMENSIONS (LxW): Open, model EZTF 6 is 6 feet x 30 inches, model EZTF 7 is 7 feet x 30 inches, model EZTF 8 is 8 feet x 30 inches, and m...[More Information]
    
    
11. EZ-ACCESS PORTABLE RAMP (MODEL R1000) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Portable Ramp, model R100, is a portable single-track wheelchair and scooter ramp designed to roll up and store in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 36 inches when extended; 30 inches wide. Collapsed diameter is 6 inches. CAPACITY: WIll hold up to 600 po...[More Information]
    
    
12. EZ-ACCESS RAMP --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Ramp is a two-track wheelchair ramp designed to be stored in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: 60 inches when extended; collapses to 28 inches. CAPACITY: 350 pounds. WEIGHT: 14 pounds....[More Information]
    
    
13. EZ-ACCESS TELESCOPING PLATFORM RAMP --- DISCONTINUED. (Verified 03/2009) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Telescoping Platform Ramp is a portable single-track wheelchair and scooter ramp designed for use by individuals with mobility disabilities. The ramp is designed to be used for curbs, one to three steps, minivans and full-size vans. This ramp features two telescoping sections that connect to create one telescoping section, allowing the ramp to be used at various lengths. The tracks are made of anodized alu...[More Information]
    
    
14. EZ-ACCESS TRACK RAMP (MODELS R2000 & R6000) --- DISCONTINUED. (Verified 02/013) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-ACCESS Track Ramp is a two-track portable telescoping ramp for vans and minivans designed to accommodate manual and electric wheelchairs. Made of aluminum with a non-skid surface, these tracks feature special snap-button catches that lock the ramp securely into place. DIMENSIONS (HxLxW each track): 2.5 x 36, 60, or 72 x 9.5 inches (model R2000); 2.5 x 48, 72, or 120 x 9.5 inches (model R6000). When collapsed for s...[More Information]
    
    
15. EZ-ACCESS VANRAMP (MODELS EZ01, EZ02, & EZ04) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Vanramp is a portable van ramp designed to enable individuals who use scooters and wheelchairs to enter and exit vans and mini-vans. These ramps are made of aluminum,and they feature non-skid surfaces. A carrying case is included with model EZ01. Simply extend the ramp, hold it securely in place with snap buttons, and align the wheels of a wheelchair in the U-shaped tracks to enter and exit vans. DIMENSION...[More Information]
    
    
16. EZ-ACESS ROLL-UP (MODELS EZ07 & EZ09) --- DISCONTINUED. (Verified 10/2007) RETAINED IN DATABASE FOR REFERENCE. --- The EZ-Access Roll-Up are portable single-track wheelchair and scooter ramps designed for use by individuals with mobility disabilities. These ramps roll up and store in a carrying case which may be attached to the back of the mobility unit. The tracks are fabricated of aluminum and feature a non-skid surface and latching on the two side rails. DIMENSIONS: Model EZ07 is 36 inches long when extended and 30 inches wide. T...[More Information]
    
    
17. FLAT FLOOR WHEELCHAIR RAMP --- DISCONTINUED. (Verified 04/2007) RETAINED IN DATABASE FOR REFERENCE. --- Wheelchair ramp for side or rear van door installation. Hinged to floorboard of van, coil spring for easy handling of ramp. Zinc plated steel frame and mesh flooring. Maximum weight capacity 650 pounds. Center step cleats, lifting handles on both sides for ease of use. Raised side walls to help guide wheels. Specify van brand and style, and side door or rear door mount, also whether floor has been lowered. Standard size...[More Information]
    
    
18. HANDICAP RAMP --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Handicap Ramp is designed to allow wheelchair users to get in and out of van-type vehicles and buildings. It is maintenance free and portable. Standard features include one-person operation; spring assisted, skid resistant, aluminum or steel construction; and side or rear door mounting. No vehicle modification is necessary for use. The ramp comes in portable folding, portable nonfolding or permanent styles. Stair lo...[More Information]
    
    
19. MINI VAN RAMP (MODEL 901) --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Sectional lightweight fiberglass ramp with attached van bracket. Two sections: each section 26 inches by 41 inches. Weight 60 pounds. Folds in half, stores in vertical position, using 5 inches of floor space. Can be removed from van by pulling two hinge pins. Ramp must be operated by attendant....[More Information]
    
    
20. MINI VAN RAMP (MVR-1) --- DISCONTINUED. (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- The Mini Van Ramp, model MVR-1, is a van ramp designed to be used with wheelchairs or for individuals who are unable to use steps to enter mini vans. The ramp is made of fiberglass and covered by a nonskid surface. The ramp fits behind the back seat and features support legs and safety side rails. The ramp mounts in the side door; no tools are required. OPTIONS: Ramp is also available for full-size vans, model VR-1. DIM...[More Information]
    
    
21. PORTA-DECK 10 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- The Porta-Deck 10 is a portable or permanent ramp designed to provide wheelchair or scooter users with access to vans, steps, or curbs up to 36 inches high. The ramp is constructed of 3 high strength aluminum sections with a slip-resistant deck. The ramp end plates have vinyl pads for slip resistant traction amd a safety pin to secure the ramp. DIMENSIONS: 10 feet long. CAPACITY: 550 pounds. WEIGHT: 90 pounds....[More Information]
    
    
22. PORTA-DECK 6 --- DISCONTINUED. (Verified 06/2010) RETAINED IN DATABASE FOR REFERENCE. --- Porta-Deck 6 is a portable and/or semi permanent ramp for vans, steps, and curbs up to 24 inches in height. The ramp is made of heavy-duty aluminum, with aluminum side rails and an aluminum deck with a slip-resistant surface. The unit has a 2-section construction. Each ramp has end plates with vinyl pads for traction. A safety pin for securing the ramp is included. CAPACITY: 550 pounds. DIMENSIONS: 6 feet long. WEIGHT: ...[More Information]
    
    
23. PORTABLE VERSA-RAMP --- DISCONTINUED. (Verified 11/2008) RETAINED IN DATABASE FOR REFERENCE. --- The Portable Versa-Ramp is a portable van ramp designed for use by individuals with mobility disabilities or spinal cord injury. The portable ramp is rolled into place on its two-wheeled dolly, folded down to the horizontal position, and extended out over steps for access by manual wheelchairs, power chairs, or scooters. When access is complete, the ramp is folded up and rolled away for storage. Access can be attained ...[More Information]
    
    
24. PORTABLE WHEELCHAIR RAMP. --- DISCONTINUED. (Verified 8/2011) RETAINED IN DATABASE FOR REFERENCE. --- Portable aluminum wheelchair ramp for vans, houses and buildings. 2 folding tracks per set. Each weighs 11 pounds. Will not rust. Adjustable telescoping length from 5 to 8 feet. 500 pound capacity per pair in fully extended position....[More Information]
    
    
25. SCOOTER RAMP --- DISCONTINUED. (Verified 8/1999) RETAINED IN DATABASE FOR REFERENCE. --- The Scooter Ramp is a portable ramp that uses two telescoping, folding tracks placed parallel to one another for use as a van ramp or building ramp. The anodized aluminum channels retract for transport and storage. CAPACITY: 660 pounds. DIMENSIONS: 6 feet 1 inch length extended, 3 feet 4 inches collapsed. WEIGHT: 24 pounds....[More Information]
    
    

Page 1 of 2    Next page »