Products are listed alphabetically.

Page 1 of 1

1. CURVED BACK INSERT --- DISCONTINUED (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Curved Thermoplastic shell with 1 inch medium density foam padding and Naugahyde upholstery. Available in 14 to 24 inch heights, with widths to fit 12, 14, 16, 18, and 20 inch wheelchairs, fitting between backposts. Customization available, including lumbar contour, posterior pelvic tilt wedge, contoured shoulder wedge. Mounts to wheelchair with variety of seating hardware....[More Information]
   
   
2. E-Z MOUNT SEAT AND BACK HARDWARE SEATING PACKAGE (PACKAGE 30XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The E-Z Mount Seat and Back Hardware Seating Package, package 30XX, is seating hardware designed for use on wheelchairs. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of fixed E-Z mount adjustable brackets; a pair of 1-inch diameter E-Z mount adjustable brackets; and a 1-inch diameter tube drop stop with rotating hold do...[More Information]
   
   
3. INVERTIBLE BACK INSERT --- DISCONTINUED (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Molded thermoplastic shell with 1 inch Sunmate foam padding. Shell inverts to position built-in lateral trunk supports higher or lower by two inches. Pre-drilled to accept Otto Bock headrest hardware, Luxury Liners headrests, and seat-to-back brackets at either end. No special orthopedic modifications available. Five standard sizes to fit 12, 14, 16, 18, or 20 inch wide wheelchairs, fitting between backposts, with back h...[More Information]
   
   
4. KENETIC BACK INSERT --- DISCONTINUED (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Thermoplastic laminated shell with hand molded foam cushion, custom made to specifications. Custom features available include custom height and width, lateral trunk supports, lumbar contour, built-in headrest, special colors. Standard sizes with back heights ranging from 16 to 26 inches, with widths to fit 12, 14, 16, 18, and 20 inch wheelchairs, fitting between backposts. Mounts to wheelchair with variety of seating har...[More Information]
   
   
5. RIFTON BACK EXTENSION AND PAD (E561, E882) --- DISCONTINUED. (Verified 05/93) RETAINED IN DATABASE FOR REFERENCE. --- Back extension for Rifton wheelchair insert. Wooden support frame increases back height from 13 to 25 inches maximum. Attaches to slots in back of insert, sliding adjustment. Additional slots in extension for adding support blocks for head. Vinyl upholstered to arm pad, 1 inch thick, 25 inches long, inserts into back extension frame....[More Information]
   
   
6. SEAT AND BACK INSERTS --- DISCONTINUED. (Verified 04/2007) RETAINED IN DATABASE FOR REFERENCE. --- Inserts made from structural plywood covered with one inch of poly-foam which is sealed to help prevent mildew. Back inserts are designed with loops that attach to the push handles. Available in a variety of standard upholstery colors. Two sizes available in seats and backs; seats: 16 inches wide by 16 inches deep, or 18 inches wide by l6 inches deep; backs: 14 inches wide by l8 inches high, or 16 inches wide by 16 inch...[More Information]
   
   
7. SEATS AND BACKS --- DISCONTINUED. (Verified 08/2008) RETAINED IN DATABASE FOR REFERENCE. --- Solid seats and backs fabricated with 1/2 inch plywood, finished both sides, with 1/4-20 T-nuts. Standard foam on seat is 1-inch Sunmate foam, and on back is 1-inch high density foam. Seat modifications include anti-thrust cushion, differential leg length, wood or foam cut- outs, extra foam thickness, or special foam. Back modifications include wood or foam cut-outs, extra foam thickness, or special foam. Hardware kits ...[More Information]
   
   
8. SOLID BACK INSERT --- DISCONTINUED. (Verified 9/2011) RETAINED IN DATABASE FOR REFERENCE. --- The Solid Back Insert is constructed of .5-inch plywood and .5-inch foam. It is leatherette covered with straps for attaching to push handles. DIMENSIONS: The insert is available in 16- and 18-inch sizes. COLOR: A choice of colors is available....[More Information]
   
   
9. SOLID BACK INSERT PACKAGE WITH UNIVERSAL HARDWARE (MODEL SBK10XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back Insert Package with Universal Hardware, model SBK10XX, is designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts model SBP10XX, and universal adjustable back mount brackets model HDW6820....[More Information]
   
   
10. SOLID BACK INSERTS --- DISCONTINUED (Verified 07/2007) RETAINED IN DATABASE FOR REFERENCE. --- Solid back insert constructed of 1/2 inch plywood with 2 inch polyurethane foam cushion and vinyl upholstery. Comes with 4 suspension brackets for back angle adjustment. OPTIONS: Systems available with contoured lumbar support or any special feature. DIMENSIONS: 16 x 14 inches, 16 x 16 inches, 16 x 18 inches, 20 x 16 inches, 20 x 18 inches, 24 x 16 inches, and 24 x 18 inches....[More Information]
    
    
11. SOLID BACK WITH ADJUSTABLE J HOOK AND FIXED HOLD DOWNS (FORWARD OF BACK UPRIGHTS) (MODEL SBK21XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Adjustable J Hook and Fixed Hold Downs (Forward of Back Uprights), model SBK21XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts model SBP10XX; two pairs of one-inch diameter tube two-hole J hooks, model HDW6230; two pairs of seven-hole adjustable L brackets, model HDW6170; and two pairs of one-inch dia...[More Information]
    
    
12. SOLID BACK WITH ADJUSTABLE J HOOK AND FIXED/ROTATING HOLD DOWNS (FORWARD OF BACK UPRIGHTS) (MODEL SBK20XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Adjustable J Hook and Fixed/Rotating Hold Downs (Forward of Back Uprights), model SBK20XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, model SBP10XX; two pairs of one-inch diameter tube two- hole J hooks, model HDW6230; two pairs of seven-hole adjustable L brackets, model HDW6170; a pair of one-inch...[More Information]
    
    
13. SOLID BACK WITH ADJUSTABLE J HOOKS AND FIXED HOLD DOWNS (BETWEEN UPRIGHTS) (MODEL SBK23XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Adjustable J Hook and Fixed Hold Downs (Between Uprights), model SBK23XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, model SBP10XX; two pairs of one-inch diameter tube six-hole J hooks, model HDW6236; two pairs of two-hole adjustable L brackets, model HDW6120; and two pairs of one-inch diameter tub...[More Information]
    
    
14. SOLID BACK WITH ADJUSTABLE J HOOKS AND FIXED/ROTATING HOLD DOWNS (BETWEEN BACK UPRIGHTS) (MODEL SBK22XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Adjustable J Hook and Fixed/Rotating Hold Downs (Between Back Uprights), model SBK22XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, model SBP10XX; two pairs of one-inch diameter tube six-hole J hooks, model HDW6236; two pairs of two-hole adjustable L brackets, model HDW6120; a pair of one-inch diame...[More Information]
    
    
15. SOLID BACK WITH DROP HOOKS AND FIXED HOLD DOWNS (BETWEEN BACK UPRIGHTS) (MODEL SBK12XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Drop Hooks and Fixed Hold Downs (Between Back Uprights), model SBK12XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, model SBP10XX, four one- inch diameter drop stops with hold down, model HDW6460, and four one-inch diameter tube drop mount hooks with 1.5 inch drop, model HDW6725....[More Information]
    
    
16. SOLID BACK WITH E-Z MOUNT HARDWARE AND ROTATING HOLD DOWNS (MODEL SBK25XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with E-Z Mount Hardware and Rotating Hold Downs, model SBK25XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, model SBP10XX; two pairs of one-inch diameter E-Z Mounts with adjustable brackets; and two pairs of one-inch diameter tube drop stops with rotating hold down, model HDW6465....[More Information]
    
    
17. SOLID BACK WITH MOUNTING HOOKS AND FIXED HOLD DOWNS (FORWARD OF BACK UPRIGHTS) (MODEL SBK24XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Solid Back with Mounting Hook and Fixed Hold Downs (Forward of Back Uprights), model SBK24XX, is a solid back insert package designed for use in adapting the back support in a wheelchair. The package includes a solid back insert with T-nuts, SBP10XX; two pairs of one-inch diameter tube, mounting hooks with one inch of lift, model HDW6331; and two pairs of one-inch diameter tube drop stops with hold down, model HDW646...[More Information]
    
    
18. SOLID INSERT SEAT & SOLID INSERT BACK --- DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. --- Solid seat or back insert. 1/2 inch solid base with 1 inch polyfoam pad. Vinyl leatherette cover. Hidem bump strap around base, specify seat size. Most sizes available....[More Information]
    
    
19. SOLID SEATS AND BACKS --- DISCONTINUED. (Verified 4/2006) RETAINED IN DATABASE FOR REFERENCE. --- Solid seats and backs for wheelchairs. Wood base covered with 1 inch polyurethane foam and covreed with 14 ounce vinyl coated nylon. Includes hardware. Drop hooks available....[More Information]
    
    
20. SPACE SAVER UNIVERSAL SEAT AND BACK HARDWARE SEATING PACKAGE (PACKAGE 13XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Space Saver Universal Seat and Back Hardware Seating Package, package 13XX, is designed for use on wheelchairs. The package includes: a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of space-saver universal, adjustable seat mount brackets; a pair of universal adjustable back mounting brackets; and a pair of long seat tabs. DIMENSIONS: 1 in...[More Information]
    
    
21. UNIVERSAL / E-Z MOUNT HARDWARE SEATING PACKAGE (PACKAGE 10XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Universal / E-Z Mount Hardware Seating Package, package 10XX, is designed for use on wheelchairs. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1-inch diameter, E-Z mount adjustable brackets; a pair of fixed E-Z mount adjustable brackets; and a pair of universal adjustable back mounting brackets. DIMENSIONS: 1-i...[More Information]
    
    
22. UNIVERSAL SEAT AND BACK HARDWARE SEATING PACKAGE (PACKAGE 11XX) --- DISCONTINUED. (Verified 06/2012) RETAINED IN DATABASE FOR REFERENCE. ---The Universal Seat and Back Hardware Seating Package, Package 11XX, is general seating hardwaredesigned for use with the seated surface of a wheelchair. The package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5- inch offset seat to back hinge; a pair of universal adjustable seating mounting brackets; a pair of universal adjustable back mounting brackets; and a pair of lo...[More Information]
    
    

Page 1 of 1