Products are listed alphabetically.

Page 1 of 1

1. ACROBAT The Acrobat is a folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: 12 to 14 inches, 14 to 16 inches, or 16 to 18 inches. The folding frame is equipped with anti-tippers and comes in a choice of black, navy blue, deep purple, red, or teal. SEAT: 2-inch wide seatbelt with auto buckle is optional. ARMRESTS: Angle-adjustable swing-away armrests with telescoping tray supports. BRAKES: Includes bra...[More Information]
   
   
2. ACTION TRACKCHAIR (MODEL ST) The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair...[More Information]
   
   
3. BASE MATE MODULAR ADAPTIVE SEATING SYSTEM Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks....[More Information]
   
   
4. C300 CORPUS The C300 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 25 inches. The C300 Corpus has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. ...[More Information]
   
   
5. C300 CORPUS JUNIOR The C300 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34.5 x 24.25 x 39.15 inches. Minimum turning radius is 40 inches. The C300 Corpus Jr. has a ground clearance of 3 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, purple ice and chili pepper red. Front anti-tippers are included. CONTROLS: Integrated programmable R...[More Information]
   
   
6. C300 PS The C300 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The C300 PS has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, metallic green, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: VR2 d...[More Information]
   
   
7. C350 CORPUS The C350 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 37 inches. The C350 Corpus has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated progr...[More Information]
   
   
8. C350 PS The C350 PS is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5. Minimum turning radius is 37 inches. The C350 PS has a ground clearance of 3.1 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, platinum silver and black onyx. Back anti-tippers are included. CONTROLS: Integrated programmable R-Net joysti...[More Information]
   
   
9. C400 CORPUS The C400 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 44 inches. Minimum turning radius is 26 inches. The C400 Corpus has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated progra...[More Information]
   
   
10. C400 CORPUS JUNIOR The C400 Corpus Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 34 x 24 x 41.5 inches. Minimum turning radius is 45 inches. The C400 Corpus Jr. has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated pr...[More Information]
    
    
11. C400 LOWRIDER The C400 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 42 x 24.25 to 28.5 x 42.5 inches. Minimum turning radius is 26 inches. The C400 Lowrider has a ground clearance of 2.8 inches and 4-wheel adjustable independent suspension. The base frame is available in crystal blue, vintage wine, extreme yellow, metallic green and black onyx. Back anti-tippers are included. CONTROLS: Integrated ...[More Information]
    
    
12. C400 VS JUNIOR The C400 VS Junior is a powered stand up wheelchair designed for use by children with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The C400 VS Jr. has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 40.5 x 24 inches. Rigid frame with push handles and a power standing unit designed into the ...[More Information]
    
    
13. C500 CORPUS The C500 Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 52.5 inches. Minimum turning radius is 28 inches. The C500 Corpus has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CONTROL...[More Information]
    
    
14. C500 LOWRIDER The C500 Lowrider is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 49.5 x 25.75 to 28.5 x 47.5 inches. Minimum turning radius is 28 inches. The C500 Lowrider has a ground clearance of 2.75 inches and 4-wheel adjustable independent suspension. The base frame is available in arctic white, crystal blue, vintage wine, platinum silver, metallic green and black onyx. Back anti-tippers are included. CON...[More Information]
    
    
15. C500 VS The C500 VS is a powered stand up wheelchair designed for use by adults with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about in either a seated or standing position. FRAME (LxW): 38 x 28.5 to 25.75 inches. Rigid frame with push handles and a power standing unit designed into t...[More Information]
    
    
16. CHEETAH WHEELCHAIR The Cheetah Wheelchair is a child's manual wheelchair designed for use by children with lower extremity disabilities, mobility disabilities, neurological disabilities, or spinal cord injury. FRAME: Composite frame with transportation tie-downs and anti-tips in a choice of silver, blue, red, or green. SEAT (LxW): Solid seat and back with built-in, step-less adjustment from 10 x 10 inches to 16 x 16 inches. The reclining backrest offers 22 degrees of manual tilt. CUSHION: Black and gray seat and b...[More Information]
    
    
17. COMPASS SPT WHEELCHAIR The Compass SPT Wheelchair is an adult tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The chair is configured for front wheel manual propulsion and can be re-configured to rear wheel propulsion without any additional parts. FRAME (LxW): 35.5 to 39.5 x 22.5 to 30.5 inches. The tilt frame offers tilt in space of 0 to 45 degrees. SEAT (LxW): 15 to 22 x 14 to 22 inches. The seat to floor height is 13.5 to ...[More Information]
    
    
18. CRUISER READY The Cruiser Ready is a child transport chair fitted with a range of positioning options. FRAME: Folding frame with reversible push handles available in the same sizes as the standard Curisers (see separate entry). This chair is available with or without tie-down brackets. SEAT: The seat is depth adjustable and the back-to-seat angle is adjustable. A reinforced seat with a canopy, headwings, trunk support, hip abductor, and padded shoulder straps with covers is standard. ARMRESTS: Padded armrests...[More Information]
    
    
19. ETAC BALDER JUNIOR Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system ...[More Information]
    
    
20. GIZMO TILT-IN-SPACE WHEELCHAIR The Gizmo Tilt in Space Wheelchair is a lightweight wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): Cane length of 8 to 13 inches (extra small), 10 to 15 inches (small), 13 to 18 inches (medium), or 15 to 20 inches (long) x 10 to 18 inches wide in one-inch increments. The chair is available in a choice of a folding or rigid frame with optional transport package for bus/van tie-down. The chair has 4...[More Information]
    
    
21. HD3 CORPUS The HD3 Corpus is a heavy duty powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 40.5 x 28 inches (base only). The minimum length for transport of the base is 36.25 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3 inches and 4-wheel adjustable independent suspension. The base frame is available in black. Front anti-tippers, front lights and side and rear reflectors ...[More Information]
    
    
22. IMPALA & IMPALA KIT Mobility base for use with Contour-U and other one-piece seating systems. Tilt in space adjustment from 8 degrees forward to 32 degrees back, with gas cylinders for weight assist in three weight ranges. Available with 12 inch spoked, 20 inch mag, or 24 inch mag rear wheels, quick release axles, 5 inch or 8 inch front casters. Interfacing hardware for aluminum pans included. Width adjustable to accommodate seating systems from 14 to 18 inches. Accommodates 14 to 21 inches seat depth. Supports up ...[More Information]
    
    
23. INVACARE 3G TORQUE WP RWD POWER CHAIR The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,...[More Information]
    
    
24. INVACARE POWER TIGER WITH ORBIT SEAT The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi...[More Information]
    
    
25. J6 (MODELS 2S-C, 2S-SS & 2SP-SS) The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD: ...[More Information]
    
    
26. JEWEL MPS WHEELCHAIR The Jewel MPS Wheelchair is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities. The tilt-in-space feature is foot-operated and hydraulically-assisted. FRAME (LxW): 40.75 inches overall length x 22 inches at base. SEAT (LxW): 16, 19, or 20 x 16, 18, or 20 inches. The MPS Supportive Seating System includes an anti-thrust seat front and lateral contouring on both the padded seat and padded backrest. The backrest is 22 inche...[More Information]
    
    
27. K300 PS JUNIOR The K300 PS Junior is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxWxH): 43 x 24.25 to 28.5 inches. Minimum turning radius is 25 inches. The K300 PS Jr.has a ground clearance of 3.1 inches and independent suspension. The base frame is available in crystal blue, vintage wine, platinum silver, black onyx, popstar pink, titan blue and chili pepper red. Front anti-tippers are included. CONTROLS: Integra...[More Information]
    
    
28. KIDSTER CHAIR The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s...[More Information]
    
    
29. KIMBA PEDIATRIC TILT-IN-SPACE MOBILITY SYSTEM The Kimba Pediatric Tilt-in-Space Mobility System is a child's tilt-in-space wheelchair or stroller designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME: Available in Size I (small/medium base) or Size II (large base). The frame color is silver - metallic. The chair ncludes an integrated shock absorption system, adjustable to the childÆs weight. Other features include a sun canopy with attendant window, height-adjustable handlebars, trigger-activated...[More Information]
    
    
30. KOALA MINIFLEX The Koala Miniflex is a powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 28-32 x 22 inches. Minimum turning radius is 36 inches. The Koala Miniflex has a ground clearance of 2.5 inches and independent suspension. The base frame is available in xtreme yellow or chili pepper red. An optional front bumper is available. CONTROLS: Right- or left-hand mounted joystick with Pilot+ Series programmable electro...[More Information]
    
    
31. LIBRE TILT The Libre Tilt is a manual tilt in space wheelchair designed for use by children or adults with mobility disabilities. FRAME: Lightweight frame in a choice of folding or rigid styles and long or standard configurations. Anti-tip tubes and short push handles are standard. Medium or tall push handles are available at no charge and adjustable clamps and push handle extensions are extra cost options. The frames accommodate growth and are available in a choice of frame widths from 10 to 18 inches wi...[More Information]
    
    
32. LUV BASE (MODEL LUV-1) Manual mobility base. Seat pan will accept a variety of seating systems. 14 by 14 inch seat pan has adjustable height of 15.5 to 19.5 inches from the floor. Gas cylinder under pan provides smooth tilt in space adjustament. Tubular steel frame. 12 inch rear wheels, 8 inch front casters. Overall length 34 inches. Overall width 25 inches. Weight of base 35 pounds. Maximum weight of user 180 pounds. Available in six colors....[More Information]
    
    
33. OASIS (KAMELEON) WHEELCHAIR The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit...[More Information]
    
    
34. ORBIT TILT-IN-SPACE WHEELCHAIR The Orbit Tilt-In-Space Wheelchair is a child tilt-in-space wheelchair designed to meet a variety of positioning needs. FRAME: Modular lightweight frame designed to accommodates a child's growth. The frame expands from 10 x 10 inches to 16 x 16 inches in one-inch increments. The chair disassembles for storage and transport. SEAT: Detachable seat. The seat is interchangeable with others in the line, allowing for seats to be changed with growth or with change in need. The seat height is adjustable...[More Information]
    
    
35. PRIMA SI (TANGO) WHEELCHAIR The Prima si Wheelchair, also called Tango, is a manual tilt-in-space wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabiltiies or spinal cord injury. FRAME: Overall frame length without the footrest is 27 to 33 inches with a 20-inch wheel, 28 to 34 inches with a 22-inch wheel, and 29 to 35 inches with a 24-inch wheel. The overall width is seat width plus 8.25 to 9.75 inches. This chair tilts from minus 5 to plus 45 degrees with three positions for b...[More Information]
    
    
36. QUICKIE RHYTHM M5 POWER CHAIR The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in...[More Information]
    
    
37. QUICKIE T45 The Quickie T45 is an adult manual tilt-in-space wheelchair designed for use by people who need to change positions without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on the regular frame and in 18- to 2...[More Information]
    
    
38. QUICKIE TS The Quickie TS is a manual tilt-in-space wheelchair designed for use by individuals who need to change position without leaving the wheelchair. FRAME: The frame is available in regular and long configurations, and frame widths range from 14 to 20 inches in 1-inch increments. Rear anti-tip tubes are standard; front anti-tip tubes are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in 15- to 17-inch depths, in 1-inch increments on th...[More Information]
    
    
39. RODEO 12 / 14 / 16 The Rodeo is a lightweight tilt-in-space wheelchair designed for use as a mobile positioning system for children with severe physical or neurological disabilities. The chair has 10 to 45 degrees of adjustable tilt and 90 to 105 degrees of seat-to-back angle adjustment. The seat depth is adjustable. Features include an adjustable-height handle, an angular adjustable footplate, elevating legrests, and an optional tray located under the chair for storing medical necessities and auxiliary equipment....[More Information]
    
    
40. SAFARI TILT FRAME, SAFARI TILT BASIC, & SAFARI TILT ANATOMICAL The Safari is a stroller or transport tilt in space chair designed for use by children or small adults with mobility disabilities. Available in a Frame Only model to accept customized seating, a Basic model, and an Anatomical model, this stroller stabilizes the user's head and neck in a functional position. FRAME (WxHxL): Black powdercoated lightweight folding frame. All models are 23 x 43.5 x 39 inches open and 15 x 14 x 48.5 inches folded. SEAT: The Frame Only model comes with no seating. The ...[More Information]
    
    
41. SKIPPI & SKIPPI PLUS The Skippi and Skippi Plus are child's powered wheelchairs designed for use by children with lower extremity, mobility, or neurological disabilities, cerebral palsy, or spinal cord injury. Adjustable and designed to grow with the child, it has multiple configuration options, and it was design to have a low profile and be compact and maneuverable. FRAME (WxL): 22.4 x 27.6 (without leg rests) or 33.5 (with leg rests) inches. It has a turning radius of 21.7 inches, and the ground clearance is 66 m...[More Information]
    
    
42. SPREE XT The Spree XT is a child's folding tilt-in-space wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities. FRAME (HxLxW): Range of 36.5 to 44 x 29.5 (without anti-tips and front rigging) x 7.5 plus seat width for 12 or 20 inch wheels and 8.75 plus seat width for 22 or 24 inch wheels (all dimensions in inches). The folding tilt-in-space frame has folding crossbraces and two-way fold-down back canes. The depth and width of the crossbraces can grow with t...[More Information]
    
    
43. STREET CORPUS The Street Corpus is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 42.25 x 24.75 inches; 32.5 x 24.75 inches (base only). The minimum dimensions for transport (HxLxW) are 31.5 x 32.5 x 24.75 inches. Minimum turning radius is 48 inches. The HD3 Corpus has a ground clearance of 2.4 inches and 4-wheel adjustable independent suspension. The base frame is available in black/gold, copper metallic and blu...[More Information]
    
    
44. X850 CORPUS The X850 Corpus is a heavy duty powered wheelchair designed for outdoor, off-road use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 49-57 x 28 inches. Minimum turning radius is 28 inches. The HD3 Corpus has a ground clearance of 3.25 inches and 4-wheel adjustable independent suspension. The base frame is available in black onyx, crystal blue and vintage wine. Front halogen lights and rear lights are included. CONTROLS: Safegate joystic...[More Information]
    
    
45. ZIPPIE TS The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel ...[More Information]
    
    

Page 1 of 1