Products are listed alphabetically.

« Previous page    Page 15 of 43    Next page »

351. Easy Driving With Double Duty Reacher. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Reacher for use in a car, developed by a person with arthritis. Reacher made with a 1/2 inch dowel cut to desired length. A rubber chair tip is attached to one end. A 5 inch piece of 3/4 by 1/4 inch finishing board is screwed onto the other end to make a T shape. Can be used to manipulate levers and buttons on the dashboard. SKILLS REQUIRED: Assembly. TITLE: Easy Driving With Double Duty Reacher JOURNAL: Accent on Living REF: Vol 26 no 2, Fall 1981...[More Information]
     
     
352. Eatery: Feeding Aid for Quadriplegics. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Feeding device manipulated with head motion and operated without electrical or mechanical power to allow self feeding by a person with limited hand function. Self feeding device made for a quadriplegic consisting of a sectioned tray with spoon shaped projections, attached to a table assembly which can be fitted to a wheelchair. The person pushes food into the spoon projections with a headstick and eats as if from a regular spoon. Requires some cont...[More Information]
     
     
353. Elastic Cuff Link. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Elastic cuff links enable person to slip hand through cuffs without unbuttoning them. This allows those with limited hand function to dress independently. An extra button is sewn on the opposite side of shirt cuff. This and the original button are then attached together using a rubber band. Cuff can stretch when hand is pushed through shirt sleeve. SKILLS REQUIRED: Sewing. AUTHOR: New York University Bellevue Medical Center Institute of Physical Me...[More Information]
     
     
354. Electronic Busy Box. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Electronic busy box is made of three flipper switches in one box in which each flipper operates a different devicE. Constructed of a sturdy box, 3 nylon or plastic spatulas, lever switches, 3 small blocks or boxes, 3 springs from inside hair rollers, cardboard, 6 volt lightbulb and socket, plastic pill bottle with snap lid, 6 volt motor, pinwheel, buzzer or doorbell, wood glue, and rosin core solder. SKILLS REQUIRED: Soldering. Assembly. AUTHOR: Bu...[More Information]
     
     
355. Elevation Board. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adjustable-angle frame to elevate the hand and arm from a sitting or lying position, intended to prevent edema in the hand. Lists materials and provides photographs and a diagram illustrating construction of the elevation board, which is made of wood with foam and vinyl padding. SKILLS REQUIRED: Woodworking. AUTHOR: Ahuja, M TITLE: Elevation Board JOURNAL: American Journal of Occupational Therapy REF: Vol 36 no 8, Aug 1982: p 534-536 PAGES (includi...[More Information]
     
     
356. Enlarged Handle for Vegetable Peeler. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Larger handle is added to a potato peeler for use by those with limited hand function. The handle of a standard vegetable peeler is inserted into a piece of aluminum tubing and fastened with rivets. SKILLS REQUIRED: Metalworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 2 REF: Middletown, Ohio: Independence Factory: p 10 NARIC CALL NUMBER: R1182 PAGES (including cover): 2 1980....[More Information]
     
     
357. Examination Table for Physically Disabled Patients. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Patient examination table that lowers to allow independent transfer from a wheelchair. Describes an elevating examination table made of the top of an examination table and a used, electrically powered hydraulically lifting dental chair. The control botton is on the side of the table. SKILLS REQUIRED: Metalworking. Electrical. Welding. AUTHOR: Staas, W E; Muldowney, J T TITLE: Examination Table for Physically Disabled Patients JOURNAL: Archives of P...[More Information]
     
     
358. Extended Comb. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Comb with extended handle for persons with limited reach. Illustrates extending the handle of a comb using 1/4 inch copper tubing flattened at one end and attached to the comb with pop rivets; the other end is glued into a hole drilled in a piece of dowel or broom handle. The rod can be bent to suit the user. SKILLS REQUIRED: Metalworking. Assembly. Woodworking. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 1 REF: Middleto...[More Information]
     
     
359. Extended Hairbrush. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Hairbrush on long handle for persons with limited reach. Illustrates extending the handle of a hairbrush using a length of 1/4 inch copper tubing flattened at one end and fastened to the brush with pop rivets; the other end is glued into a handle made of a wood dowel of the size easiest to grip. The tubing is bent to suit the user. SKILLS REQUIRED: Metalworking. Assembly. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 1 REF...[More Information]
     
     
360. Extended Handle Clippers. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Nail clippers with extended handles for added leverage. Illustrates nail clippers with 3/4 by 4 inch metal strips spot welded to the handles. SKILLS REQUIRED: Welding. AUTHOR: Independence Factory TITLE: How to Make it Cheap Manual: Volume 1 REF: Middletown, Ohio: Independence Factory: p 36 NARIC CALL NUMBER: R1181 PAGES (including cover): 2 1980....[More Information]
     
     
361. Extended Handle Toothbrush. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Two methods for extending the handle of a toothbrush for those with limited finger dexterity. Describes two toothbrush adaptations: 1) A toothbrush is slipped 3/4 of an inch into the desired length of metal tubing which is struck with a hammer to flatten it against the brush handle; the tubing can be bent and wrapped with rubber tape if desired. 2) To add a wider grip, the end of the tubing is glued into a hole drilled into a wooden dowel of the pr...[More Information]
     
     
362. Extended Razor. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Extended handle for a safety razor for a person with limited reach. Handle of a double edged safety razor glued into a length of aluminum tubing bent to suit the user. Rubber tape can be used to increase grip. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1976....[More Information]
     
     
363. Extensions for Cabinet Knobs. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pull handle for a drawer or cabinet door for someone who has difficulty using small knobs. Pull handle made of a large electrical ring tongue, plastic coated cable and a piece of soft rubber hose. This is held in place by the knob itself. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1183 PAGES (including cover): 2 1977....[More Information]
     
     
364. FACECLOTH WRINGER --- DO IT YOURSELF ENTRY ---PURPOSE: To enable a person with limited or no hand strength to wring out a face or dish cloth. The article includes diagrams showing two versions of a mechanism to remove most of the water from a cloth without requiring finger or grip strength. In one version, a metal plate with a 90-degree bend is bolted to the edge of a kitchen or bathroom sink. A second plate with drain holes is connected to the lower edge of the first plate by a hinge. A handle is attached to the...[More Information]
     
     
365. FEEDER BOARD ATTACHMENT. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Attachment for a wheelchair laptray, used to stabilize dishes and glasses for a user who lacks coordination. The feeder board clamps on top of a regular laptray with medium size C clamps. The dishes, cups and glasses the person uses fit into cutout holes in the board. Topview and sideview diagrams included. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny I...[More Information]
     
     
366. FEEDING TUBE HOLDER --- DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable an individual with ALS to indepemdemtly pour liquid meals into a feeding tube. The device consists of a quarter-inch plywood base with an upright length of plywood attached to it. The syringe barrel is attached to the side of the 2 x 4, enabling the user to use two hands to pour the liquid food. The unit disassembles for travel and storage. MATERIALS: one piece of quarter-inch plywood, a 9-inch length of 2 x 4, and fasteners. TOOLS: Wood shop tool...[More Information]
     
     
367. FILE ADAPTATION ---"DO IT YOURSELF" ENTRY --- PURPOSE: To enable people with limited grip strength to remove files from file cabinets. To adapt hanging file folders, thread cable ties through the center tab slots of the hanging file folder. Create a loop by attaching the two ends of the cable tie. This is done on each side of the hanging folder. Adjust the loop by pulling on the cable tie. Users can place their hands through the front and back loops of the file they need and pull the file out. MATERIALS: Seven...[More Information]
     
     
368. FILE CABINET ADAPTATION ---"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with grasping and other upper extremity disabilities to open file cabinet drawers. Drill a hole vertically above and below the existing hand pull on each drawer and place the U-shaped handle vertically over the holes.Place a washer and nut over the threaded ends of the screws provided with the handles (longer screws may be required). Place the screws into the drilled holes from the inside of drawer and then into the handles, and tighte...[More Information]
     
     
369. FINGER HOLED PICK. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pick with finger rings to provide support while strumming. A ring pick is modified with an extra finger ring to provide extra support while strumming. the extra ring can be attached in several ways depending on the ability of the person. It can be applied to a closed fist with the pick extending out from the hand, or over the second and third fingers where it does not interfere with the thumb. Can be made with polyform or be cementing a second comm...[More Information]
     
     
370. FINGER LOOP WRITING DEVICE ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Finger splint made of molded plastic to position fingers in an optimal three point pinch for writing. Describes constructing a loop splint made of 18 inches of 1/2 inch plastic which can be molded when warmed in hot water. Designed to be less bulky than a regular splint. Must be made to fit each individual. Includes drawings. COMMENTS: Designed by Dorie Milner, OTR, Institute of Rehabilitation Medicine, 400 E 34th Street, New York 10016. SKILLS REQ...[More Information]
     
     
371. FINGER SLEEVE PICK. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Pick is recommended for persons with stiff finger joints or those with hypotonic hand muscles. Pick is adapted from a standard bowling thumb protector by inserting elastic for sizing and a wrist strap for support. Any commercial plastic pick can be glued to the leather thumb protector. Strumming accomplished by flexion or extension movements of the fingers or a rake grasp movement in abduction or adduction by the shoulder girdle. Includes drawing. ...[More Information]
     
     
372. FINGERNAIL BOARD. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: One hand fingernail file with a nonslip base. Instructions are provided to make a fingernail file using a small board of wood with a curved top. Top with an emery board or fine sandpaper. A dowel with a pointed end can be placed at an angle from the base to use to clean under fingernails. Foam rubber base to prevent slipping. Includes drawing. SKILLS REQUIRED: Simple Woodworking. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Ins...[More Information]
     
     
373. FISHING POLE HOLDER -------- DO IT YOURSELF ENTRY --------- PURPOSE: To create a do-it-yourself fishing pole holder for an individual with limited use of their arm related to stroke. A tube, made of plastic water pipe which is slightly larger in diameter than the fishing rod handle is attached at an angle to the arm of a folding chair. The chair should be carefully chosen for a sturdy arm rest and reinforced if necessary. Once the fishing rod is cast with one hand the rod is then placed in the tube and "locked" in ...[More Information]
     
     
374. FISHING RIG, THE --- DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with quadriplegia to fish. The rig is built of tough half-inch Lexan plastic and fastens securely to the wheelchair frame, providing a strong, stable platform close to the stomach. On that platform is a universal joint that allows sideways rotation and up and down swing. The handle of the fishing rod is adapted to fit into the universal joint. (Another option is to attach the adapter arm to the handle of any fishing rod with wrap-arou...[More Information]
     
     
375. FISHING STOOL AND STORAGE BOX WITH ADJUSTABLE ROD HOLDER. ------- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides the angler a seat, storage and solid support for the fishing rod. Drawing which presents a wooden stool-like box with a hinged top and rope handle; a steel plate is screwed to the top edge of the box, and a steel tube is welded to the hinged steel plate. The tube and plate assembly is adjustable, and holds the fishing rod in place. SKILLS REQUIRED: Welding, woodworking. AUTHOR: British Sports Assoc for the Disabled. TITLE: Water Sports for...[More Information]
     
     

« Previous page    Page 15 of 43    Next page »