Products are listed alphabetically.

Page 1 of 1

1. AISLEMASTER FOLDING (MODEL 8020) The AisleMaster Folding, model 8020, is an emergency evacuation carrier and transfer wheelchair for onboard an airplane designed for use by individuals with lower extremity, mobility, or neurological disabilities, or spinal cord injury. This wheelchair has a slender width and front-and-rear telescoping lifting handles to allow passage through narrow doorways, confined aisles, and stairways. FRAME (HxLxW): 47 x 32 x 16 inches; when folded (HxDxW) 147 x 17 x 16 inches. The frame is yellow. SEAT:...[More Information]
   
   
2. ALBACMAT RESCUE MAT The AlbacMat Rescue Mat is an emergency evacuation system designed for use with individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has two safety straps at the torso and the shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The straps and handles ar...[More Information]
   
   
3. ALBACMAT WITH THERMAL COVER The AlbacMat with Thermal Cover is an emergency evacuation system designed for use with large individuals with mobility disabilities or spinal cord injury. Made of a polypropylene board covered by a lightweight canvas material, the unit has a handle above the user's head, a handle below the user's feet, and three handles on each side. It has three safety straps at the torso, hips and shins to secure the user to the mat, and a pocket at the bottom in which the user places his or her feet. The str...[More Information]
   
   
4. BARIATRIC EVACUATION SLYDE (MODEL 6410) The Bariatric Evacuation Slyde, model 6410, is an emergency evacuation slide designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The Slyde is a rectangular sled that enables two to seven attendants to move a non-ambulatory individual down the stairway in a multi-floor building. The slide is made of corrugated polypropylene, and comes with restraints with Fastex buckle that cross the user’s chest. It has four extended length web h...[More Information]
   
   
5. COMFORT CARRIER EVACUATION SYSTEM The Comfort Carrier Evacuation System is an emergency evacuation system designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. Designed for use in multistory buildings, the package includes an ADA-compliant steel cabinet with an alarm and a clearly illustrated acrylic window, which is placed on the wall near a fire exit; a Comfort Carrier Evacuation Sling (see separate entry), which fits inside the cabinet; illustrated usage instructions; an overhead...[More Information]
   
   
6. EVAC+CHAIR 300H (MODEL MK-4) The Evac+Chair 300H, model MK-4, is an emergency evacuation carrier that allows one non-disabled person to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with a handle located in the rear above the passenge...[More Information]
   
   
7. EVAC+CHAIR 600H The Evac+Chair 600H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and track belts to move the person down multiple flights of stairs and across landings to exit a building. This chair pivots in its own width for tight landing turns. It has an aluminum alloy frame with two rear ha...[More Information]
   
   
8. EVACUATION CHAIR (MODEL 6254) The Evacuation Chair, model 6254, is an emergency evacuation carrier designed for use by individuals with mobility disabilities. This chair features a rear Stair-TREAD system, a tank-style track system to enable the chair to be moved down stairs by one person without lifting. FRAME (HxWxD): 45 x 20.5 x 28 inches. The chair is 11 inches deep when folded. The lightweight aluminum frame folds for storage and features extendable head and foot lift handles with molded handgrips for two-person liftin...[More Information]
   
   
9. EVACUATION SLYDE (MODEL 6400) The Evacuation Slyde, model 6400, is an emergency evacuation slide designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. The Slyde is a rectangular sled that enables two to seven attendants to move a non-ambulatory individual down the stairway in a multi-floor building. The slide is made of corrugated polypropylene, and comes with restraints with Fastex buckle that cross the user’s chest. It has four extended length web handles (on...[More Information]
   
   
10. EVACUPOD OVERLAY (MODELS EVP 1 & EVP 100) The Evacupod Overlay, models EVP 1 and EVP 100, is an emergency evacuation system that serves as a foam mattress overlay when not in use. The Evacupod Overlay is made of pressure-relieving, visco-elestic memory foam covered by quilted, 4-way stretch antimicrobial sheeting. It attaches to the mattress of a standard hospital bed with four elastic straps that fit over the mattress corners. In case of emergency, the Evacupod Overlay is detached from the mattress and secured around the user using thr...[More Information]
    
    
11. EVACUPOD WALL UNIT (MODELS EVP 2 & EVP 200) The Evacupod Wall Unit, models EVP 2 and EVP 200, is an emergency evacuation system designed for individuals with mobility disabilities and spinal cord injury. This rectangular is inflated, and the user lays on it. Three patient retainer straps fasten at the user's chest, hips and shins to secure the user on the mat. When the straps are tightened, the inflated mat wraps around the user so that the user is protected from impacts on the bottom and sides. There are eight lifting straps on each side...[More Information]
    
    
12. GARAVENTA EVACU-TRAC (MODEL CD7) The Garaventa Evacu-Trac, model CD7, is an attendant operated emergency evacuation carrier designed to transport wheelchair users down stairs to safety during situations when building elevators cannot be used. This folding evacuation chair consists of a metal frame with six auxilliary wheels to allow it to move on flat surfaces and to pivot for negotiation on small stair landings, two rubber tracks to grip the stairs, and a sling-seat with adjustable safety belts with quick connecting Velcro str...[More Information]
    
    
13. IBEX TRAN-SEAT 700H The IBEX Tran-Seat 700H is an emergency evacuation carrier that allows two non-disabled people, one in the rear of the chair and one in front, to move a seated individual with lower extremity, mobility, and neurological disabilities, or spinal cord injury. It uses a combination of wheels and belted treads to move the person down multiple flights of stairs and across landings to exit a building. The treads work with an adjustable pressure brake to allow the chair to be eased down stairs creating...[More Information]
    
    
14. RESQMAT The ResQmat is an emergency evacuation system designed for use with individuals with lower extremity, walking or mobility disabilities or spinal cord injury. The ResQmat is intended to provide the means for a nondisabled person to move a non-ambient individual to a safe location in an emergency. This product consists of a thick foam pad with a vinyl backing and a pillow at one end. There are two fabric handles - one above the user's head and another below the user's feet – and a strap that runs...[More Information]
    
    
15. RESQME The ResQme is an emergency evacuation system designed for use with individuals with lower extremity, walking or mobility disabilities or spinal cord injury. The ResQme is intended to provide the means for a nondisabled person to move a non-ambient individual to a safe location in an emergency. This product consists of a board with a footplate that folds up on one end and an adjustable pillow at the other end. There are two fabric handles - one above the user's head and another below the user's ...[More Information]
    
    
16. SKI PAD The Ski Pad is an emergency evacuation system designed for use with individuals with mobility disabilities or spinal cord injury. Made of a rectangular foam pad covered by a vinyl, the unit has a handle above the user's head and a handle below the user's feet. It has two safety restraints at the torso and the shins to secure the user to the pad, and a pocket at the bottom in which the user places his or her feet. The safety restraints fasten with standard seat belt buckles. Once the user is secu...[More Information]
    
    
17. SKI SHEET The Ski Sheet is an emergency evacuation system designed for individuals with mobility disabilities or spinal cord injury and other people who are unable to get out of bed. The Ski Sheet straps to the underside of a mattress of a bed with four elastic straps that fit over the mattress corners. In case of emergency, the caregiver(s) extend the halves of two safety restraints from the four corners of the sheet and fasten across the chest and legs of the user, securing him or her to the mattress. W...[More Information]
    
    
18. SMITHCOT The Smithcot is a flexible canvas sling that can be used for moving persons with mobility, walking or lower extremity disabilities or seniors, or as an emergency evacuation carrier. The Smithcot is designed to hold an individual comfortably but securely around tight corners or down stairways. It is made of a single square of #8 100% cotton duck cloth, and it has four grip handles, one a at each corner. The Smithcot is not for use with people who have suspected back or neck injuries. DIMENSIONS (...[More Information]
    
    

Page 1 of 1