Skip navigation Return to standard layout with columns
Menu

Pride Mobility Products Corporation

182 Susquehanna Avenue
Exeter, Pennsylvania 18643
United States
Telephone: 800-800-8586.
Fax: 800-800-1636.
Web: http://www.pridemobility.com.
Email: info@pridemobility.com.

Products manufactured by Pride Mobility Products Corporation (listed alphabetically)

  1. CELEBRITY X 3 WHEEL Picture of CELEBRITY X 3 WHEEL

    The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features accessible tie-down points for securing the unoccupied scooter during transport. The scooter is available in viper blue or candy apple red. CONTROLS: Delta tiller with wrap-around handles. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 19 x 16 deluxe foldable molded seat with sliders. The standard back height is 14 inches. The seat-to-deck height adjusts from 16.25 to 17.5 inches and the seat- to-ground height adjusts from 23 to 24.25 inches. The seat post is front frame mounted for stability with three standard adjustments. A lap belt and a powered elevating seat are available as options. ARMRESTS: Standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheel is 3.5 x 10 inches and the rear wheels are 4 x 10 inches. Pneumatic tires are standard and solid tires are optional. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, jumbo front basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 6 miles per hour for a range of up to 25 miles. CAPACITY: 350 pounds. WEIGHT: 141.5 pounds without batteries. WARRANTY: Three-year limited warranty on the frame.

  2. CELEBRITY X 4 WHEEL Picture of CELEBRITY X 4 WHEEL

    The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features accessible tie-down points for securing the unoccupied scooter during transport. The scooter is available in viper blue or candy apple red. CONTROLS: Delta tiller with wrap-around handles. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 19 x 16 deluxe foldable molded seat with sliders. The standard back height is 14 inches. The seat-to- deck height adjusts from 16.25 to 17.5 inches and the seat-to-ground height adjusts from 23 to 24.25 inches. The seat post is front frame mounted for stability with three standard adjustments. A lap belt and a powered elevating seat are available as options. ARMRESTS: Standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheels are 3.5 x 10 inches and the rear wheels are 4 x 10 inches. Pneumatic tires are standard and solid tires are optional. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, jumbo front basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 6 miles per hour for a range of up to 25 miles. CAPACITY: 350 pounds. WEIGHT: 151 pounds without batteries. WARRANTY: Three-year limited warranty on the frame.

  3. CELEBRITY XL (MODEL SC4450DX) Picture of CELEBRITY XL (MODEL SC4450DX)

    The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip controls are located on an independently angle-adjustable console on the tiller. The console has wrap-around handles on each side. The tiller also can be adjusted to multiple angles. The Celebrity XL includes a front basket and a full lighting package with directional signals and angle-adjustable dual bulb lower headlight. RWD: 24-volt DC motor with sealed transaxel drive. SEAT (WxDxH): 18 x 18 x 27 inches. A CRS deluxe reclining high back seat is standard. The seat rotates, slides toward the front and back, and is height-adjustable. It has an adjustable headrest. An optional power seat is available. ARMRESTS: Flip-up, padded armrests. BRAKES: Regenerative brakes and disc park brake. WHEELS: Four 4 x 13 inch wheels with gray pneumatic tires. Flat-free tires are optional. OPTIONS: Rear basket; weather cover; crutch holders; oxygen tank holder; walker holder; safety flag. POWER: 24-volt motor uses 2 removable 12-volt, deep-cycle (AGM or gel-cell type recommended) size U1 (31-36 AH) batteries. An off-board 5- amp battery charger is included. SPEEDS: Maximum forward speed of 8 miles per hour with a range of 25 miles. Reverse speed is 60 percent of the forward speed. The unit includes an electronic speed control. CAPACITY: 350 pounds. WEIGHT: 247 pounds with batteries; 200 pounds without batteries. When disassembled, heaviest piece is 83 pounds. WARRANTY: The manufacturer offers a limited three-year warranty on this product.

  4. COUNTRY LIFT CHAIR (MODEL TMR-400)

    The Country Lift Chair, model TMR-400, is a seat lift recliner chair for individuals with limited mobility to help them get into and out of the chair. It features a sealed single switch, paddle type, hand control; 4 rubberized leveler legs; an oak frame; fire retardant materials; a quick disconnect of electrical components; and a double plate, wide base, steel frame for stability. The chair reclines 8 inches more than standard recliners for near full bed positioning. POWER: 115 volt AC, 1.5 amps, with an 8-foot power cord. DIMENSIONS: Back width 32 inches; seat height 18 inches; overall width 34 inches; seat depth 20 inches; back height 28 inches; seat width 21 inches. WARRANTY: Lifetime warranty on the lift frame.

  5. GENTLE LIFT RECLINER (MODELS TMR48, TMR49, TMR348, TMR329, & ECONOMY)

    The Gentle Lift Recliner line includes 2- and 3-position, fully reclining seat lift chairs designed to assist individuals who have difficulty sitting down in or getting up from arm chairs. Features include a hardwood (oak) frame; fire retardant materials; quick disconnect electrical components; arm, headrest, and frame covers; a double plate, wide base with steel base frame for stability; and a large side pocket. The entire chair lifts with the user seated to raise the user to a standing position. Model 348 is a three-position sleep recliner and the others are two-position recliners. CONTROLS: Hand-held single-switch remote. POWER: Uses 110-volt standard alternating current (AC), 1.5 amps, with an 10-foot cord. OPTIONS: Fabric protection, vibration, and Allante leather-like upholstery. SIZES: Petite, medium, or tall. DIMENSIONS: The back width is 28 inches on models 48, 49, and 348 and 30 inches on model 329. The seat height is 18 inches on all models. The seat (WxD) is 20 x 18 inches on model 49, 20 x 21inches on model 48, 21 x 22 inches on model 348, and 23 x 22 on model 329. An optional 25-inch wide seat is available on model 329. The dimensions on the Economy model match those of model 48. Custom dimensions are available. CAPACITY: 350 pounds; model 329 with the optional 25-inch seat has a capacity of 450 pounds. WEIGHT: 125 pounds. COLOR: Pacific blue, cranberry, mocha, teaberry, almond, emerald, green, and blue. WARRANTY: Lifetime warranty on the steel frame and a three-year component warranty on all models except the Economy model which has a one-year warranty.

  6. GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E) Picture of GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E)

    The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). The scooter is equipped with rear anti-tips. The turning radius is 32.5 inches and ground clearance is 2.625 inches. RWD: Rear wheel drive with sealed mini transaxle drive. SEAT: Foldable molded plastic seat. UPHOLSTERY: Vinyl. ARMRESTS: Standard. BRAKES: Electronic/ regenerative and electromechanical dual braking system. WHEELS: 2 x 8 inch solid front tire and 2.5 x 8 inch solid rear tires. POWER: Uses two 12-volt deep cycle (AGM or gel cell type) batteries, 12 AH or 17 AH. An off-board dual voltage battery charger is included. SPEEDS: 4.25 miles per hour. CAPACITY: 260 pounds. WEIGHT: 75 pounds without battery. The battery pack weighs 21 pounds with two 12 AH batteries or 33 pounds with two 17 AH batteries.

  7. GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E) Picture of GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E)

    The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are standard. The turning radius is 32.5 inches and ground clearance is 2.5 inches. RWD: Rear wheel drive with sealed mini transaxle drive. SEAT: Foldable molded plastic seat. UPHOLSTERY: Vinyl. ARMRESTS: Standard. BRAKES: Electronic/regenerative and electromechanical dual braking system. WHEELS: Two 2 x 7 inch solid front tires and two 2.5 x 8 inch solid rear tires. POWER: Uses two 12-volt deep cycle (AGM or gel cell type) batteries, 12 AH or 17 AH. An off-board dual voltage battery charger is included. SPEEDS: 4.25 miles per hour. CAPACITY: 260 pounds. WEIGHT: 79 pounds without battery. The battery pack weighs 21 pounds with two 12 AH batteries or 33 pounds with two 17 AH batteries.

  8. GO-GO ULTRA 3 WHEEL SCOOTER Picture of GO-GO ULTRA 3 WHEEL SCOOTER

    The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. The seat is a compact, foldable molded foam seat. The seat-to- ground height is 18.75 to 19.75 inches and the back height is 12.75 inches. UPHOLSTERY: Black vinyl. WHEELS: The front tire is 2 x 7.5 inches; the rear tires are 3 x 7.5 inches. POWER: Uses two deep cycle AGM or Gel Cell batteries (size 12 AH). An off-board battery charger is included. SPEEDS: 4 miles per hour. CAPACITY: 250 pounds. WEIGHT: 92 pounds.

  9. HERCULES (MODELS 2000 & 3000)

    Hercules, model 2000 and 3000 is a trunk mounted scooter loader or van lift designed to lift scooters into vans or car trunks. These lifts feature an aluminized bronze sprocket that is non-corrosive and stronger than most steel. The sprocket assembly creates a four-to-one gear ratio for increased lifting capacity and the assembly is supported by a haf-inch steel shaft and needle bearing. The gearbox location allows greater height clearance and a low center of gravity provides ease in handling. The lift also utilizes a winch motor with a dynamic breaking system, allowing the lifting to be stopped at any point. A variety of docking attachments are available to accommodate almost any scooter and the scooter attachment has been designed to avoid cutting or altering of the scooter. Attachments are also available to allow the seat to remain on the scooter if the cargo space of the vehicle permits. Model 2000 is designed for use with scooters and model 3000 is designed for use with the Jazzy power chair line (see separate entries).

  10. HURRICANE (MODEL PMV5001) Picture of HURRICANE (MODEL PMV5001)

    The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The body has fenders and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: 24-volt DC rear-wheel drive transaxle. SEAT (WxD): 18 x 18 inches. A reclining high-back seat with adjustable headrest is standard. The seat height is 20.5 inches without the headrest and 27 to 29 inches with the headrest. The seat slides forward and back and can be adjusted vertically. A power elevating seat is optional. The seat-to-deck height is 16.5 to 19.5 inches, and the seat-to-ground height is 23 to 26 inches. UPHOLSTERY: Vinyl or fabric in charcoal gray, black, or brown. ARMRESTS: Flip-up, padded armrests. BRAKES: Electronic brakes and rear brake are standard. WHEELS: Four 4 x 13 inch wheels with gray pneumatic tires. OPTIONS: Rear basket; safety flag; dust cover. POWER: Uses two 12-volt deep-cycle batteries (not included); sizes NF-22 or U-1. AGM or gel cell types are recommended. A 5-amp on-board battery charger is included. SPEEDS: Maximum forward speed of 9 miles per hour with a range of up to 30 miles. Reverse speed is 60 percent of the forward speed. The unit includes an electronic speed control. CAPACITY: 400 pounds. WEIGHT: 285 pounds including batteries; 209 pounds without batteries. The front and rear sections each weighs 82 pounds. WARRANTY: Three-year limited warranty.

  11. J6 (MODELS 2S-C, 2S-SS & 2SP-SS) Picture of J6 (MODELS 2S-C, 2S-SS & 2SP-SS)

    The J6, models 2S-C, 2S-SS and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.5 x 23.25 inches with a 2.25-inch ground clearance and a 21.25-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 75 amp Q-Logic NE joystick controller is standards; other controllers are available. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD): The standard seats are contour medium or high back, 18 x 18 inches, or a specialty seating kit or a Synergy seat, 18 x 16 inches. Other sizes are available. The Synergy seat is available with manual recline and manual tilt. TRU-Balance 2 power tilt seats also are available. UPHOLSTERY: Beige, brown, black or gray vinyl; or brown or gray fabric. ARMRESTS: Flip-up, cane-mounted armrests with 10- or 14-inch arm pads are standard. Optional armrests include flip-up, removable, 2-post height adjustable armrests; removable, height-adjustable heavy-duty armrests; and single-post height adjustable armrests. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch rear and 5-inch front nylon, spherical-shaped casters are standard. WHEELS: 10-inch wheels with flat-free tires are standard. FOOTRESTS: Elevating footrests are standard. Swing-away footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An off-board 5 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 15 miles. CAPACITY: 300 pounds (250 pounds with a powered tilt seat). WARRANTY: Lifetime limited warranty on the frame; 13-month limited warranty on electronics and drive motors (models 2S-C and 2S-SS). Lifetime limited warranty on the frame; 2-year limited warranty on electronics; and 18-month limited warranty on drive motors (2SP-SS).

  12. JAZZY 1113 ATS (MODELS 2SP-C & 2SP-SS) Picture of JAZZY 1113 ATS (MODELS 2SP-C & 2SP-SS)

    The Jazzy 1113 ATS, models 2SP-C and 2SP-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 23 inches with a 2.5-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac suspension, a low center of gravity and a non-folding frame. It has 6-inch front anti-tips. The chair is available in viper blue, onyx black, champagne and candy apple red. CONTROLS: 50 amp PG VSI joystick controller; other controllers are available. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The standard seat is 18 x 18 inches contoured medium-backed scooter-style seat with a solid seat pan. Limited reclining, depth-adjustable seats with a high back and other custom seats are available. The Synergy seat is available with manual recline and manual tilt. TRU-Balance power tilt and power recline seats also are available. A lap belt is optional. UPHOLSTERY: Beige or gray vinyl. ARMRESTS: Flip-up, fixed, 2-post armrests with 10- or 14-inch arm pads are standard. Flip-up, fixed cane-mounted armrests or flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 8-inch rear solid casters are standard. WHEELS: 10-inch wheels with flat-free knobby tires are standard. FOOTRESTS: A foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, stroller handle, accessory mounting bracket, rear basket, saddle bag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An on-board 4 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 15 miles. CAPACITY: 300 pounds. WARRANTY: Lifetime limited warranty on the frame; 2-year limited warranty on electronics; and 18-month limited warranty on drive motors.

  13. JAZZY 1170 XL PLUS (MODELS 2VHD-SS, 2VHD-C, 3VHD-SS & 3VHD-C) Picture of JAZZY 1170 XL PLUS (MODELS 2VHD-SS, 2VHD-C, 3VHD-SS & 3VHD-C)

    The Jazzy 1170 XL Plus, models 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46.25 x 30 inches with a 4-inch ground clearance and a 26.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red, viper blue or onyx black. CONTROLS: A 70 amp PG VSI integral controller is standard; 70 amp PG Remote Plus remote control, 70 amp PG Microdrive controller or Dynamic DX controller is optional. MWD: Two motor, independent mid-wheel drive. SEAT (WxD): The standard seat is a 26 x (20, 22 or 26) inches contoured high-backed scooter-style seat with or without a solid seat pan, with a headrest, and with adjustable height and angle. Seat widths up to 28 inches and medium backrests are available, and a Synergy seat is optional. UPHOLSTERY: Beige or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads, are standard; height-adjustable padded armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 9-inch pneumatic rear casters are standard; 16-inch solid rear casters are optional. WHEELS: 16-inch pneumatic wheels are standard; 16-inch solid wheels are optional. FOOTRESTS: A height-and angle-adjustable footrest platform is standard. Swing-away footrests, elevating footrests, and heel loops are available. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt Group 24 batteries. An off-board 5 amp battery charger is included. SPEEDS: 5 miles per hour with a maximum range of 15 miles. CAPACITY: 500 pounds. WARRANTY: Lifetime limited warranty on the frame and a 13-month warranty on electronics and drive motors (models 2VHD-SS and 2VHD-C); lifetime limited warranty on the frame, two-year warranty on electronics, and an 18-month warranty on the drive motors (models 3VHD-SS and 3VHD-C).

  14. JAZZY 1420 (MODELS 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS & 3VHD-C) Picture of JAZZY 1420 (MODELS 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS & 3VHD-C)

    The Jazzy 1420, models 2HD-SS, 2HD-C, 2VHD-SS, 2VHD-C, 3VHD-SS and 3VHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 46 x 27.25 inches with a 4.5-inch ground clearance and a 25.75-inch turning radius. This wheelchair comes standard with Active-Trac suspension for enhanced outdoor performance. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red, sunburst orange, viper blue or onyx black. CONTROLS: A 70 amp VR2 integral controller is standard; a 70 amp PG Microdrive controller is optional. MWD: Two motor, independent mid-wheel drive. SEAT (WxD): The standard seat is a 22 x 20 inches or 24 x (20 or 22) inches contoured high-backed scooter-style seat with or without a solid seat pan, with a headrest. A manual reclining high back seat (WxD) (16, 18 or 20) x (16, 18 or 20) inches is also available for no extra charge. Medium backrests are available, and TRU-Balance and Synergy seats are optional. UPHOLSTERY: Beige or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads, are standard; height-adjustable padded armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 9-inch pneumatic rear casters are standard; 16-inch solid rear casters are optional. WHEELS: 16-inch pneumatic wheels are standard; 16-inch solid wheels are optional. FOOTRESTS: A height-and angle-adjustable footrest platform is standard. Swing-away footrests, elevating footrests, and heel loops are available. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt Group 24 batteries. An off-board 8 amp battery charger is included. SPEEDS: 4.5 miles per hour with a maximum range of 20 miles. CAPACITY: 500 pounds. WARRANTY: Lifetime limited warranty on the frame and a 13-month warranty on electronics and drive motors (models 2HD-SS, 2HD-C, 2VHD-SS and 2VHD-C); lifetime limited warranty on the frame, two-year warranty on electronics, and an 18-month warranty on the drive motors (models 3VHD-SS and 3VHD-C).

  15. JAZZY 1650 (MODELS 3EHD-SS & 3EHD-C) Picture of JAZZY 1650 (MODELS 3EHD-SS & 3EHD-C)

    The Jazzy 1650, models 3EHD-SS and 3EHD-C, is a bariatric powered wheelchair designed for indoor and outdoor use by large adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47 x 30.375 inches with a 4.25-inch ground clearance and a 26.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 8-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair comes in champagne, gray, candy apple red, viper blue or onyx black. CONTROLS: 100 amp PG Remote Plus controller. MWD: Four-pole, in-line, mid-wheel drive. SEAT (WxD): The standard seat is a 22 x 20 inches contoured high-backed scooter-style seat with or without a solid seat pan, with a headrest. Widths ranging from 20 to 32 inches and depths ranging from 18 to 28 inches, both in 2-inch increments, are also available for no extra charge. HD Synergy seats, (20-32) x (18-28) inches (1-inch increments), are optional. A lap belt is optional. UPHOLSTERY: Black, beige or gray vinyl. ARMRESTS: Flip-up, removable, height-adjustable armrests with 10- or 14-inch flat or waterfall arm pads, are standard. BRAKES: Electronic, regenerative disc brakes. CASTERS: 9-inch pneumatic rear casters are standard; 9-inch solid rear casters are optional. WHEELS: 16-inch pneumatic wheels are standard; 16-inch solid wheels are optional. FOOTRESTS: A height-and angle-adjustable footrest platform is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt Group 24 batteries; or four NF-22 batteries with optional Extended Range Package. An off-board 8 amp battery charger is included. SPEEDS: 4.25 miles per hour with a maximum range of 15 miles (20 miles with optional Extended Range Package). CAPACITY: 650 pounds. WARRANTY: Lifetime limited warranty on the frame, two-year warranty on electronics, and an 18-month warranty on the drive motors.

  16. JAZZY 600 (MODELS 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS & 3SP-C) Picture of JAZZY 600 (MODELS 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS & 3SP-C)

    The Jazzy 600, models 2S-C, 2S-SS, 3S-C, 3S-SS, 3SP-SS and 3SP-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.5 inches with a 3-inch ground clearance and a 20.5-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in champagne, candy apple red, viper blue, black onyx, kelly green, pewter, emerald green, sapphire blue, silver, graphite blue and tangerine. CONTROLS: 60 amp PG VR 2 controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured medium-backed scooter-style seat with or without a solid seat pan. Limited reclining, depth-adjustable seats with a high back and other custom seats are available. A lap belt is optional. UPHOLSTERY: Beige or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch rear and 5-inch nylon, spherical-shaped front casters are standard. WHEELS: 14-inch wheels with flat-free tires are standard. FOOTRESTS: A foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle NF-22 batteries. An off-board 5 amp battery charger is included. SPEEDS: 5 miles per hour. CAPACITY: 300 pounds (models 2S-C, 2S-SS, 3S-C and 3S-SS) or 250 pounds (3SP-SS and 3SP-C). WARRANTY: Lifetime limited warranty on the frame; 2-year limited warranty on electronics; and 18-month limited warranty on drive motors.

  17. JAZZY 614 (MODELS 2S-C & 2S-SS) Picture of JAZZY 614 (MODELS 2S-C & 2S-SS)

    The Jazzy 614, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD): The standard seat is a (10 to 22) x (10 to 22) inches (in 1-inch increments). Standard available back rest heights are 18 to 25 inches in 1-inch increments. Synergy reclining seats and backs and other custom seats are available. A lap belt and head rest are optional. UPHOLSTERY: Gray vinyl. ARMRESTS: Flip-up, fixed, 2-post armrests with 10- or 14-inch arm pads are standard. Flip-up, fixed cane-mounted armrests or flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid front and rear casters are standard. WHEELS: 14-inch wheels with flat-free, knobby tires are standard. FOOTRESTS: A depth-adjustable foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, stroller handle, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle NF-22 batteries. An off-board 5 amp battery charger is included. SPEEDS: 4.5 miles per hour with a maximum range of 16 miles. CAPACITY: 300 pounds. WARRANTY: Lifetime limited warranty on the frame; 13-month limited warranty on electronics and drive motors.

  18. JAZZY 614HD (MODELS 2HD-C & 2HD-SS) Picture of JAZZY 614HD (MODELS 2HD-C & 2HD-SS)

    The Jazzy 614HD, models 2HD-C and 2HD-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 25.125 inches (without riggings) with a 2.25-inch ground clearance and a 20-inch turning radius. This wheelchair has Active-Trac (ATX) suspension and a non-folding frame. The chair is available in red and blue. CONTROLS: 50 amp joystick controller. MWD: Two-motor, Mid-Wheel 6 drive. SEAT (WxD): The standard seat is a (18 to 24) x (18 to 24) inches (in 1-inch increments). Standard available back rest heights are 18 to 25 inches in 1-inch increments, and a head rest is included. Synergy reclining seats and backs and other custom seats are available. A lap belt is optional. UPHOLSTERY: Gray vinyl. ARMRESTS: Flip-up, cane-mounted armrests with 10- or 14-inch arm pads are standard. Optional armrests include flip-up, removable, 2-post height adjustable armrests; removable, height-adjustable heavy-duty armrests; and single-post height adjustable armrests. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid front and rear casters are standard. WHEELS: 14-inch wheels with flat-free, knobby tires are standard. FOOTRESTS: A depth-adjustable foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, stroller handle, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle NF-22 batteries. An off-board 5 amp battery charger is included. SPEEDS: 4.25 miles per hour with a maximum range of 11 miles. CAPACITY: 450 pounds. WARRANTY: Lifetime limited warranty on the frame; 13-month limited warranty on electronics and drive motors.

  19. JAZZY ELITE 6 (MODELS 2S-C & 2S-SS) Picture of JAZZY ELITE 6 (MODELS 2S-C & 2S-SS)

    The Jazzy Elite 6, models 2S-C and 2S-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 23.25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured high-backed scooter-style seat with a headrest with or without adjustable depth or a limited ability to recline. Custom seats are available. A lap belt is optional. UPHOLSTERY: Black or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid rear casters and 5-inch solid front casters are standard. WHEELS: 9-inch wheels with flat-free tires are standard. FOOTRESTS: A foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, saddlebag and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An off-board 3 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 13 miles. CAPACITY: 300 pounds. WARRANTY: Five-year limited warranty on the frame and a 13-month warranty on electronics and drive motors.

  20. JAZZY FREEDOM Picture of JAZZY FREEDOM

    The Jazzy Freedom is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23.25 inches with a 2-inch ground clearance and a 25-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame that is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured high-backed scooter-style seat with a headrest with or without adjustable depth or a limited ability to recline. Custom seats are available. A lap belt is included. UPHOLSTERY: Black or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid rear casters and 5-inch solid front casters are standard. WHEELS: 9-inch wheels with flat-free tires are standard. FOOTRESTS: A foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, saddlebag and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An off-board 3-amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 13 miles. CAPACITY: 300 pounds. WARRANTY: Five-year limited warranty on the frame and a 13-month warranty on electronics and drive motors.

  21. JAZZY SELECT 14 (MODELS 14-C & 14-SS) Picture of JAZZY SELECT 14 (MODELS 14-C & 14-SS)

    The Jazzy Select 14, models 14-C and 14-SS, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 38 x 24.75 inches (without front riggings) with a 3-inch ground clearance and a 21-inch turning radius. This wheelchair has limited suspension and a non-folding frame. The chair is available in blue and red. CONTROLS: 60 amp joystick controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured medium-backed scooter-style seat with a solid seat pan. Limited reclining, depth-adjustable seats with a high back and other custom seats are available. A lap belt is optional. UPHOLSTERY: Beige or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 8-inch rear and 6-inch solid casters are standard. WHEELS: 14-inch wheels with flat-free tires are standard. FOOTRESTS: A foot platform (WxD) 7.25 or 8.5 x 6 inches is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, in-car charger cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle NF-22 batteries. An off-board 5 amp battery charger is included. SPEEDS: 5 miles per hour with a maximum range of 15 miles. CAPACITY: 300 pounds. WARRANTY: 5-year limited warranty on the frame; 1-year limited warranty on electronics and drive motors.

  22. JAZZY SELECT 6 Picture of JAZZY SELECT 6

    The Jazzy Select 6 is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 35.625 x 23.5 inches with a 2-inch ground clearance (at anti-tips) and a 20.5-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with Active-Trac suspension and an articulating rear caster beam. The chair is available in red and blue. CONTROLS: 40 amp PG GC 2 controller. MWD: Two-motor, in-line, mid-wheel drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured high-backed scooter-style seat with or without a solid seat pan, with a headrest and limited ability to recline. Powered elevating seats, depth-adjustable folding seats and other custom seats are available. A lap belt is optional. UPHOLSTERY: Black or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid front and rear casters are standard. WHEELS: 10-inch wheels with flat-free tires are standard. FOOTRESTS: An adjustable height and depth foot platform is standard. Swing-away footrests, elevating footrests, height-and angle-adjustable footrest platform and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An off-board 3 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 15 miles. CAPACITY: 300 pounds. WARRANTY: Five-year limited warranty on the frame and a 13-month limited warranty on electronics and drive motors.

  23. JAZZY SELECT ELITE Picture of JAZZY SELECT ELITE

    The Jazzy Select Elite is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 34.375 x 22.75 inches with a 1.5-inch ground clearance (at anti-tips) and a 24.75-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 3-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 40 amp PG GC 3 controller. FWD: Two-motor, in-line, front-wheel drive. SEAT (WxD): The standard seat is a (18 or 20) x (18 or 20) inches contoured high-backed scooter-style seat with or without a solid seat pan, with a headrest and limited ability to recline. Custom seats are available. A lap belt is optional. UPHOLSTERY: Black or gray vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid rear casters are standard. WHEELS: 9-inch wheels with flat-free tires are standard. FOOTRESTS: A 9.5-inch deep foot platform is standard. Swing-away footrests, elevating footrests, height-and angle-adjustable footrest platform and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle U-1 batteries. An off-board 3 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 15 miles. CAPACITY: 300 pounds. WARRANTY: Five-year limited warranty on the frame and a 13-month warranty on electronics and drive motors.

  24. JAZZY SELECT HD (MODELS HD-SS & HD-C) Picture of JAZZY SELECT HD (MODELS HD-SS & HD-C)

    The Jazzy Select HD, models HD-SS and HD-C, is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 37.75 x 25 inches with a 2.5-inch ground clearance (at anti-tips) and a 27-inch turning radius. This wheelchair has limited suspension. It has a non-folding frame with 6-inch front anti-tip wheels controlled by independent dynamic spring-struts. The chair is available in red and blue and has Jazzy Armor with shroud and controller guards. CONTROLS: 60 amp controller. MWD: Two-motor, mid-wheel drive. SEAT (WxD): The standard seat is a (20 or 22) x (18, 20, or 22) inches contoured high-backed scooter-style seat without a solid seat pan, with a headrest and limited ability to recline. Seats with a solid seat pan are also available, and the maximum seat size (WxD) is 24 x 24 inches. A lap belt is optional. UPHOLSTERY: Black vinyl. ARMRESTS: Flip-up, removable armrests with 10- or 14-inch arm pads are standard. Flip-up, removable, height-adjustable armrests are optional. BRAKES: Electronic, regenerative disc brakes. CASTERS: 6-inch solid rear casters are standard. WHEELS: 14-inch wheels with flat-free, knobby tires are standard. FOOTRESTS: A (WxD) 13.75 x 11 inches foot platform is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder and a cane/crutch holder. OPTIONS: Dust cover, cup holder, rear basket, saddlebag, oxygen tank holder, walker holder, and a cane/crutch holder. POWER: Uses two 12-volt deep cycle NF-22 batteries. An off-board 5 amp battery charger is included. SPEEDS: 4 miles per hour with a maximum range of 13.45 miles. CAPACITY: 450 pounds. WARRANTY: Five-year limited warranty on the frame and a 13-month limited warranty on electronics and drive motors.

  25. LEGEND XL Picture of LEGEND XL

    The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-wheel drive transaxle. SEAT (WxDxH): 17 x 17 x 17 inches. Custom seat dimensions are available. The orthopedically- designed padded seat swivels 360 degrees and the seat height from the scooter floor adjusts from 17 to 21 inches. UPHOLSTERY: Vinyl or fabric. ARMRESTS: Flip-up, padded armrests are width-adjustable. BRAKES: Electronic disc brakes. WHEELS: Two 4 x 11.5 inch front wheels and two 4 x 12 inch rear wheels with gray all-terrain tires. Hubcaps are optional. OPTIONS: Front and rear lights, front and rear baskets, dust cover, crutch holders, and others. POWER: 24-volt direct current output motor using 2 removable sealed lead acid U-1 type batteries. A built-in on-board battery charger is included. Two 40 AH batteries are available for extended range. SPEEDS: Maximum forward speed of 5.7 miles per hour (60 percent reverse) with a range of 20 to 25 miles with the standard batteries and up to 30 miles with the larger optional batteries. The unit includes an electronic speed control. CAPACITY: 300 pounds. A special option increases capacity to 400 pounds. WEIGHT: The rear section weighs 49 pounds, the seat weighs 23 pounds, and the tiller and base weigh 53 pounds. WARRANTY: The manufacturer offers a limited three-year warranty on this product; an additional warranty is available at an extra charge.

  26. PRIDE BODY LOUNGER (MODELS TMR-570 & TMR-670)

    The Body Lounger, models TMR-570 and TMR-670, are seat lift recliner chairs designed to assist individuals with limited mobility in rising from the chair. This chair features four rubberized leveler legs; an oak frame; fire retardant materials; quick- disconnect electrical components; custom fit pillows with zipper closure allow the removal or addition of poly fiberfill; a contoured ottoman and seat cushion; a large side pocket; and a double plate, wide-base, steel frame for stability. The chair reclines to near full bed positioning. Model TMR-670 has two motors. POWER: Uses 115-volt alternating current (AC), 1.5 amps; an 8-foot power cord is included. OPTIONS: Massage, fabric protection, Allante leather-like upholstery, and others. DIMENSIONS: The back width is 30 inches and the back height is 27 inches; the seat depth, width, and height are 21 inches. Custom dimensions are available. CAPACITY: 350 pounds. COLOR: Rose, aztec, taupe, natural, ocean blue, cinnamon, and hunter green. WARRANTY: Lifetime warranty on lift frame and a three-year warranty on components..

  27. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-10) Picture of PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-10)

    The Pride Classic 2-Position Partial Recline Lift Chair, model CL-10 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 33.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 25 inches from the seat. The seat should be placed 12 inches from the wall to allow space for the reclining function. CAPACITY: 325 pounds. WEIGHT: 110 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

  28. PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-20) Picture of PRIDE CLASSIC 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL CL-20)

    The Pride Classic 2-Position Partial Recline Lift Chair, model CL-20 is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 32.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 11 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 114 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

  29. PRIDE CLASSIC 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL CL-30) Picture of PRIDE CLASSIC 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL CL-30)

    The Pride Classic 3-Position Full Recline Chaise Lounger, model CL-30, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 34 inches; the distance from the seat to floor is 20 inches; the depth of the lift chair is 20 inches and the width is 22 inches. The top of the seat back extends 26 inches from the seat. The seat should be placed 12 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 118 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

  30. PRIDE CLASSIC 3-POSITION FULL RECLINE LIFT CHAIR (MODEL CL-15) Picture of PRIDE CLASSIC 3-POSITION FULL RECLINE LIFT CHAIR (MODEL CL-15)

    The Pride Classic 3-Position Full Recline Lift Chair, model CL-15, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 33.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 325 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty. Lifetime warranty on steel lift frame.

  31. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-450) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-450)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-450, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward, and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and split style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 38 inches; the distance from the seat to floor is 20 inches; the seat depth and width are 20 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  32. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550L) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550L)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a split style removable black. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat massage, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 69 to 74 inches. The overall chair width is 41 inches; the distance from the seat to floor is 20 inches; the seat depth is 22 inches and the seat width is 23 inches. The top of the seat back extends 28 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 120 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  33. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550M) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550M)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward, and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and removable black. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 38 inches; the distance from the seat to floor is 19 inches; the seat depth is 20 inches and the seat width is 21 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  34. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550S) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-550S)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-550S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and removable black. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is up to 63 inches. The overall chair width is 36.5 inches; the distance from the seat to floor is 19 inches; the seat depth is 18 inches and the seat width is 19 inches. The top of the seat back extends 26 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 117 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  35. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-585) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-585)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-585, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and split style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 65 to 72 inches. The overall chair width is 36 inches; the distance from the seat to floor is 20 inches; the seat depth and width are 20 inches. The top of the seat back extends 26 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 120 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  36. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-590) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-590)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-590, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and removable shell style back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 66 to 73 inches. The overall chair width is 42.5 inches; the distance from the seat to floor is 22 inches; the seat depth is 22 inches and the seat width is 26 inches. The top of the seat back extends 26 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 136 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  37. PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-595) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LL-595)

    The Pride Elegance 3-Position Full Recline Chaise Lounger, model LL-595, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward, and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and removable black. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 65 to 72 inches. The overall chair width is 37 inches; the distance from the seat to floor is 20 inches; the seat depth is 20 inches and the seat width is 22 inches. The top of the seat back extends 25 inches from the seat. The seat should be placed 17.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 125 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year pro-rated warranty. Lifetime warranty on steel lift frame.

  38. PRIDE ELEGANCE 3-POSITION FULL RECLINE LARGE CHAISE LOUNGER (MODEL LC-570L) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE LARGE CHAISE LOUNGER (MODEL LC-570L)

    The Pride Elegance 3-Position Full Recline Large Chaise Lounger, model LC-570L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is from 69 to 74 inches. The overall chair width is 41.5 inches; the distance from the seat to floor is 21 inches; the depth and width of the seat are 22 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 24 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 114 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame.

  39. PRIDE ELEGANCE 3-POSITION FULL RECLINE MEDIUM CHAISE LOUNGER (MODEL LC-570M) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE MEDIUM CHAISE LOUNGER (MODEL LC-570M)

    The Pride Elegance 3-Position Full Recline Medium Chaise Lounger, model LC-570M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 36 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 26.5 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 113 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame.

  40. PRIDE ELEGANCE 3-POSITION FULL RECLINE PETITE CHAISE LOUNGER (MODEL LC-570P) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE PETITE CHAISE LOUNGER (MODEL LC-570P)

    The Pride Elegance 3-Position Full Recline Petite Chaise Lounger, model LC-570P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is 62 inches and below. The overall chair width is 35 inches; the distance from the seat to floor is 18 inches; the depth and width of the seat are 18 inches. The top of the seat back extends 22.5 inches from the seat. The seat should be placed 15.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 106 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame.

  41. PRIDE ELEGANCE 3-POSITION FULL RECLINE PETITE WIDE CHAISE LOUNGER (MODEL LC-570PW) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE PETITE WIDE CHAISE LOUNGER (MODEL LC-570PW)

    The Pride Elegance 3-Position Full Recline Petite Wide Chaise Lounger, model LC-570PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a blown fiber pillow removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is 63 inches and below. The overall chair width is 40 inches; the distance from the seat to floor is 19 inches; the depth of the seat is 19 inches and the width of the seat is 24 inches. The top of the seat back extends 24 inches from the seat. The seat should be placed 16 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 114 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame

  42. PRIDE ELEGANCE 3-POSITION FULL RECLINE SMALL CHAISE LOUNGER (MODEL LC-570S) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE SMALL CHAISE LOUNGER (MODEL LC-570S)

    The Pride Elegance 3-Position Full Recline Small Chaise Lounger, model LC-570S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable blown fiber pillow back The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is 63 inches and below. The overall chair width is 35 inches; the distance from the seat to floor is 19 inches; the depth and width of the seat are 19 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 16.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 110 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame.

  43. PRIDE ELEGANCE 3-POSITION FULL RECLINE WIDE CHAISE LOUNGER (MODEL LC-570W) Picture of PRIDE ELEGANCE 3-POSITION FULL RECLINE WIDE CHAISE LOUNGER (MODEL LC-570W)

    The Pride Elegance 3-Position Full Recline Wide Chaise Lounger, model LC-570W, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. This chair offers comfort seating utilizing a spring design and one-piece soft foam seat for added relaxation. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both recline and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable blown fiber pillow back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, lumbar pillow and footrest extension (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 40 inches; the distance from the seat to floor is 20 inches; the seat depth is 20 inches and the seat width is 24 inches. The top of the seat back extends 26.5 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 117 pounds. COLORS: A variety of colors are available. WARRANTY: 7-year prorated warranty. Lifetime warranty on steel lift frame.

  44. PRIDE HERITAGE 2-POSITION PARTIAL RECLINE CHAISE LOUNGER (MODEL GL-358XXL) Picture of PRIDE HERITAGE 2-POSITION PARTIAL RECLINE CHAISE LOUNGER (MODEL GL-358XXL)

    The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-358XXL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 66 to 73 inches. The overall chair width is 43 inches; the distance from the seat to floor is 20 inches; the depth of the seat is 22 inches and the width is 30 inches. The top of the seat back extends 29 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 600 pounds. WEIGHT: 168 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on steel lift frame.

  45. PRIDE HERITAGE 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL GL-58) Picture of PRIDE HERITAGE 2-POSITION PARTIAL RECLINE LIFT CHAIR (MODEL GL-58)

    The Pride Heritage 2-Position Partial Recline Lift Chair, model GL-58, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 35 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 11.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 108 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  46. PRIDE HERITAGE 3-POSITION FULL RECLINE HEAVY-DUTY CHAISE LOUNGER (MODEL GL-358XL)

    The Pride Heritage 3-Position Full Recline Heavy-duty Chaise Lounger, model GL-358XL, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 66 inches to 73 inches. The overall chair width is 39.5 inches; the distance from the seat to floor is 20 inches; the depth of the seat is 21 inches and the width of the seat is 26 inches. The top of the seat back extends 29 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 500 pounds. WEIGHT: 159 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

  47. PRIDE HERITAGE 3-POSITION FULL RECLINE LARGE CHAISE LOUNGER (MODEL GL-358L) Picture of PRIDE HERITAGE 3-POSITION FULL RECLINE LARGE CHAISE LOUNGER (MODEL GL-358L)

    The Pride Heritage 3-Position Full Recline Large Chaise Lounger, model GL-358L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, heat and massage functions, head pillow, and lumbar pillow (not included). DIMENSIONS: The user height range is from 69 to 74 inches. The overall chair width is 37 inches; the distance from the seat to floor is 21 inches; the depth and width of the seat are 22 inches. The top of the seat back extends 25.5 inches from the seat. The seat should be placed 17.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 120 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  48. PRIDE HERITAGE 3-POSITION FULL RECLINE MEDIUM CHAISE LOUNGER (MODEL GL-358M) Picture of PRIDE HERITAGE 3-POSITION FULL RECLINE MEDIUM CHAISE LOUNGER (MODEL GL-358M)

    The Pride Heritage 3-Position Full Recline Medium Chaise Lounger, model GL-358M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with footrest extension, heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 35 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 117 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

  49. PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE CHAISE LOUNGER (MODEL GL-358P) Picture of PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE CHAISE LOUNGER (MODEL GL-358P)

    The Pride Heritage 3-Position Full Recline Petite Chaise Lounger, model GL-358P, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is 62 inches and below. The overall chair width is 34.5 inches; the distance from the seat to floor is 18 inches; the depth and width of the seat are 18 inches. The top of the seat back extends 24 inches from the seat. The seat should be placed 17.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT:112 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on the steel lift frame.

  50. PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE WIDE CHAISE LOUNGER (MODEL GL-358PW) Picture of PRIDE HERITAGE 3-POSITION FULL RECLINE PETITE WIDE CHAISE LOUNGER (MODEL GL-358PW)

    The Pride Heritage 3-Position Full Recline Petite Wide Chaise Lounger, model GL-358PW, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a button back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is 63 inches and below. The overall chair width is 39 inches; the distance from the seat to floor is 19 inches; the seat depth is 19 inches and the seat width is 24 inches. The top of the seat back extends 23.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 119 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

  51. PRIDE HERITAGE 3-POSITION FULL RECLINE SMALL CHAISE LOUNGER (MODEL GL-358S) Picture of PRIDE HERITAGE 3-POSITION FULL RECLINE SMALL CHAISE LOUNGER (MODEL GL-358S)

    The Pride Heritage 3-Position Full Recline Small Chaise Lounger, model GL-358S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available with heat and massage, head pillow and lumbar pillow (not included). DIMENSIONS: The user height range is from 63 inches and below. The overall chair width is 35 inches; the distance from the seat to floor is 19 inches; the depth and width of the seat are 18 inches. The top of the seat back extends 23.5 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 118 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

  52. PRIDE LUXURY LIFT / RECLINER (MODEL TMR-570)

    The Pride Luxury Lift / Recliner, model TMR-570, is a recliner chair designed to assist individuals mobility disabilities in rising to a standing position. This electric chair features single-button control of all positions, including three recline positions and standing. This padded chair has a hardwood frame,a large side pocket, a removable fully-padded chaise, and velour upholstery. CONTROLS: Hand-held push-button remote with an eight-foot power cord. POWER: Uses standard household current with integrated battery back-up. OPTIONS: Massage, heat, head pillow, Levante leather-like upholstery, and others. DIMENSIONS (WxDxH): The seat is 20 x 21 x 20 inches. An optional seat width of 23 inches is available. The back is 30 inches wide and the distance from the seat to the top of the back is 27 inches. CAPACITY: 375 pounds. COLOR: The standard upholstery comes in forest, black cherry, cappuccino, admiral blue, Santa Fe, dusty rose, and toffee. The optional Levante upholstery comes in mushroom, burgundy, royal blue, or pine mountain. WARRANTY: Limited four-year warranty with a lifetime warranty on the lift mechanism.

  53. PRIDE MEDIA CHAIR (MODEL LC-900) Picture of PRIDE MEDIA CHAIR (MODEL LC-900)

    The Pride Media Chair, model LC-900, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and partial arm covers, large dual side pockets, and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics and a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Media wedge (only available in Lexis Vinyl). DIMENSIONS: The user height range is from 65 to 72 inches. The overall chair width is 34 inches; the distance from the seat to floor is 19 inches; the depth of the seat is 20 inches and the width of the seat is 22 inches. The top of the seat back extends 22 inches from the seat. The seat should be placed 17 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 120 pounds. Media Wedge is 38 pounds (not included). COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  54. PRIDE SILVERSTAR SINGLE FOLD RAMP Picture of PRIDE SILVERSTAR SINGLE FOLD RAMP

    The Silver Star Single Fold Ramp is a curb or threshold ramp designed for use by individuals with mobility disabilities. This lightweight, portable ramp has an integrated, high traction surface, and can be used to overcome a variety of obstacles at home and during travel. DIMENSIONS (LxW): 2, 3, 4, 5, or 6 feet x 29.5 inches. CAPACITY: 600 pounds. WARRANTY: 3-year transferable warranty.

  55. PRIDE SILVERSTAR SOLID RAMP Picture of PRIDE SILVERSTAR SOLID RAMP

    The Pride SilverStar Solid Ramp is a ramp designed for use by individuals with mobility disabilities. This lightweight aluminum ramp has built-in traction control and side rails for safety, and is slotted for moisture drainage. It comes with securement components for mounting. DIMENSIONS (LxW): 1.5, 2, 3, 4, or 5 feet x 30 inches. CAPACITY: 600 pounds. WARRANTY: 3 year transferable warranty.

  56. PRIDE SPECIALTY 2-POSITION PARTIAL RECLINE WALL HUGGER CHAISE LOUNGER (MODEL LL-805) Picture of PRIDE SPECIALTY 2-POSITION PARTIAL RECLINE WALL HUGGER CHAISE LOUNGER (MODEL LL-805)

    The Pride Specialty 2-Position Partial Recline Wall Hugger Chaise Lounger, model LL-805, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 2-way partial recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, and removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 35 inches; the distance from the seat to floor is 19 inches; the depth and width of the chair is 20 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 4 inches from the wall to allow space for the reclining function. CAPACITY: 300 pounds. WEIGHT: 118 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 4 year limited warranty.

  57. PRIDE SPECIALTY 3-POSITION CHAISE LOUNGER (MODEL LC-102) Picture of PRIDE SPECIALTY 3-POSITION CHAISE LOUNGER (MODEL LC-102)

    The Pride Specialty 3-Position Chaise Lounger, model LC-102, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. This model chair differs from most other Pride lift chair models in that it is constructed with an overall smaller frame. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and partial arm covers, and a dual pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics and a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The user height range is from 56 to 64 inches. The overall chair width is 25.5 inches; the distance from the seat to floor is 16 inches; the depth of the seat is 17 inches and the width of the seat is 16 inches. The top of the seat back extends 23.5 inches from the seat. The seat should be placed 16 inches from the wall to allow space for the reclining function. CAPACITY: 250 pounds. WEIGHT: 106 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty.

  58. PRIDE SPECIALTY 3-POSITION FULL RECLINE (MODEL GL-310) Picture of PRIDE SPECIALTY 3-POSITION FULL RECLINE (MODEL GL-310)

    The Pride Specialty 3-Position Full Recline Lift Chair, model GL-310, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include a standard fire retardant head cover, large dual side pockets, and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The user height range is from 62 to 70 inches. The overall chair width is 30 inches; the distance from the seat to floor is 20 inches; the depth of the seat is 20 inches and the width of the seat is 21 inches. The top of the seat back extends 24.5 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 115 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  59. PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LC-105) Picture of PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER (MODEL LC-105)

    The Pride Specialty 3-Position Full Recline Chaise Lounger, model LC-105, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and partial arm covers, and a sewn pillow-styled removable back. The unit comes with a transformer that features self-diagnostic electronics and a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The user height range is from 64 to 72 inches. The overall chair width is 32.75 inches; the distance from the seat to floor is 18 inches; the depth of the seat is 19 inches and the width of the seat is 20 inches. The top of the seat back extends 27.5 inches from the seat. The seat should be placed 18 inches from the wall to allow space for the reclining function. CAPACITY: 325 pounds. WEIGHT: 138 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 1 year limited warranty.

  60. PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH FLIP-OPEN ARMS (MODEL LL-571) Picture of PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH FLIP-OPEN ARMS (MODEL LL-571)

    The Pride Specialty 3-Position Full Recline Chase Lounger with Flip-open Arms, model LL-571, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and partial arm covers, standard fold-away table built into the arms, large dual side pockets, and removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 65 to 72 inches. The overall chair width is 38 inches; the distance from the seat to floor is 21 inches; the depth and width of the seat are 22 inches. The top of the seat back extends 27 inches from the seat. The seat should be placed 16 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 113 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  61. PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH FOOTREST EXTENSION (MODEL LL-575) Picture of PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH FOOTREST EXTENSION (MODEL LL-575)

    The Pride Specialty 3-Position Full Recline Chase Lounger with Footrest Extension, model LL-575, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and partial arm covers, standard fold-away table built into the arms, large dual side pockets, and removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 73 to 78 inches. The overall chair width is 41.5 inches; the distance from the seat to floor is 21 inches; the depth and width of the seat are 22 inches. The top of the seat back extends 31 inches from the seat. The seat should be placed 24 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 138 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  62. PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH TRANSFER ARMS (MODEL LL-570T) Picture of PRIDE SPECIALTY 3-POSITION FULL RECLINE CHAISE LOUNGER WITH TRANSFER ARMS (MODEL LL-570T)

    The Pride Specialty 3-Position Full Recline Chase Lounger with Transfer Arms, model LL-570T, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. It features 3-way full recline positioning and a lift mechanism that facilitates standing and sitting. Both the recline and the lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, transfer arms, large dual side pockets, and removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow, and lumbar pillow. DIMENSIONS: The user height range is from 65 to 72 inches. The overall chair width is 35.5 inches; the distance from the seat to floor is 20 inches; the depth and width of the seat are 20 inches. The top of the seat back extends 29.5 inches from the seat. The seat should be placed 20.5 inches from the wall to allow space for the reclining function. CAPACITY: 375 pounds. WEIGHT: 128 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on steel lift frame.

  63. PRIDE SPECIALTY INFINITE POSITION SLEEP FULL RECLINE CHAISE LOUNGER (MODEL LL-770L) Picture of PRIDE SPECIALTY INFINITE POSITION SLEEP FULL RECLINE CHAISE LOUNGER (MODEL LL-770L)

    The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770L, is a seat lift chair sleeper, and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Available heat and massage, head pillow and lumbar pillow. Bed options include mattress, fitted sheet, and storage bag. DIMENSIONS: The user height range is from 65 inches to 72 inches. The distance from the seat to floor is 21 inches; the depth of the seat is 21 inches and the width of the seat is 22 inches. The top of the seat back extends 28 inches from the seat. The seat should be placed 30 inches from the wall to allow space for the full reclining function. Optional mattress (LxDxW): 73 x 3 x 20 inches. CAPACITY: 375 pounds. WEIGHT: 134 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year prorated warranty. Lifetime warranty on the steel lift frame.

  64. PRIDE SPECIALTY INFINITE POSITION SLEEP FULL RECLINE CHAISE LOUNGER (MODEL LL-770S) Picture of PRIDE SPECIALTY INFINITE POSITION SLEEP FULL RECLINE CHAISE LOUNGER (MODEL LL-770S)

    The Pride Specialty Infinite Position Sleep Full Recline Chaise Lounger, model LL-770S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for sitting, reclining, standing, and for use as a bed, this chair features full recline positioning and a lift mechanism that facilitates all three functions. Both the recline, sleep, and lift mechanisms are controlled by a push-button hand control connected to the chair by a cord. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers, large dual side pockets, and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). OPTIONS: Heat and massage, head pillow and lumbar pillow. DIMENSIONS: The maximum user height is 64 inches. The distance from the seat to floor is 19 inches; the depth of the seat is 19.5 inches and the width of the seat is 19 inches. The top of the seat back extends 24 inches from the seat. The seat should be placed 28 inches from the wall to allow space for the full reclining function. CAPACITY: 375 pounds. WEIGHT: 129 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 7 year pro-rated warranty. Lifetime warranty on the steel lift frame.

  65. PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125L) Picture of PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125L)

    The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125L, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift mechanisms are controlled by two separate motors; one for the back and one for the footrest. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics and a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The user height range is from 65 inches to 72 inches. The overall seat width is 35.5 inches. The distance from the seat to floor is 19 inches; the depth of the seat is 19 inches and the width of the seat is 22 inches.The top of the seat back extends 28.5 inches from the seat. The seat should be placed 24 inches from the wall to allow space for the full reclining function. CAPACITY: 375 pounds. WEIGHT: 140 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty.

  66. PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125M) Picture of PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125M)

    The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125M, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift mechanisms are controlled by two separate motors; one for the back and one for the footrest. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics and a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The user height range is from 64 inches to 72 inches. The overall chair width is 31.5 inches. The distance from the seat to floor is 19 inches; the seat depth and width are 20 inches. The top of the seat back extends 28.5 inches from the seat. The seat should be placed 24 inches from the wall to allow space for the full reclining function. CAPACITY: 375 pounds. WEIGHT: 136 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty.

  67. PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125S) Picture of PRIDE SPECIALTY INFINITE POSITION TRENDENLENBURG CHAISE LOUNGER (MODEL LC-125S)

    The Pride Specialty Infinite Position Trendelenburg Chaise Lounger, model LC-125S, is a seat lift chair and recliner designed for use by individuals with lower extremity and mobility disabilities. The chair portion is made of a laminate hardwood frame and the lift mechanism has a steel frame. Designed for standing, sitting, and reclining, this chair features full recline with infinite Trendelenburg positioning and a lift mechanism that facilitates all three functions. Both the recline and lift mechanisms are controlled by two separate motors; one for the back and one for the footrest. The built-in heavy-duty lift actuator can raise the chair and lean it forward and a scissor mechanism controls the reclining functions. Other features include standard fire retardant head and arm covers and a sewn pillow style removable back. The unit comes with a transformer that features self-diagnostic electronics with a 12-inch cord. POWER: Uses household current, and it has a built-in battery back-up that allows the chair to return to the sitting position in the event of a power outage. The battery back-up requires 2 9-volt batteries (not included). DIMENSIONS: The maximum user height is 64 inches. The overall chair width is 31 inches. The distance from the seat to floor is 18.5 inches; the seat depth is 18 inches and the seat width is 20 inches. The top of the seat back extends 23 inches from the seat. The seat should be placed 19 inches from the wall to allow space for the full reclining function. CAPACITY: 375 pounds. WEIGHT: 126 pounds. COLORS: A variety of colors and fabrics are available. WARRANTY: 2 year limited warranty.

  68. QUANTUM DYNAMO

    Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes as small as 10 x 10 inches. BRAKES: Electronic regenerative disc brakes. CASTERS: 8-inch solid rear casters. WHEELS: 10-inch pneumatic drive wheels and 6-inch solid, front-mounted adjustable anti-tip wheels. FOOTRESTS: Swing-away footrests. POWER: Uses two 12 volt, U-1 batteries with a per-charge range of up to 25 miles. An on-board battery charger is standard. SPEEDS: 4 miles per hour. CAPACITY: 160 pounds. WEIGHT: Base weight is 79.5 pounds, seat weight is 44 pounds, and battery weight is 24.5 pounds. WARRANTY: Lifetime limited warranty on frame, 2-year limited warranty on electronics, and 18-month limited warranty on drive motors.

  69. QUANTUM DYNAMO ATS

    Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes as small as 10 x 10 inches. BRAKES: Electronic regenerative disc brakes. CASTERS: 8-inch solid rear casters. WHEELS: 10-inch pneumatic drive wheels and 6-inch solid, front-mounted adjustable anti-tip wheels. FOOTRESTS: Swing-away footrests. POWER: Uses two 12 volt, U-1 batteries with a per-charge range of up to 25 miles. An on-board battery charger is standard. SPEEDS: 4 miles per hour. CAPACITY: 160 pounds. WEIGHT: Base weight is 90.5 pounds, seat weight is 44 pounds, and battery weight is 24.5 pounds. WARRANTY: Lifetime limited warranty on frame, 2-year limited warranty on electronics, and 18-month limited warranty on drive motors.

  70. RALLY Picture of RALLY

    The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control box mounted on a height- and angle-adjustable tiller. Forward and reverse is controlled by pressing levers mounted on the tiller. An on/off key is included. Custom controls are available. RWD: Rear wheel drive with a 24-volt direct current (DC) one-piece transaxle. SEAT (WxDxH): 18 x 17 x 13 inches. The seat height adjusts from 13.5 to 15.5 inches. The removable, swiveling seat has a folding back. Custom seat dimensions are optional. UPHOLSTERY: Choice of gray padded vinyl or fabric upholstery. ARMRESTS: Flip-up, width-adjustable armrests. BRAKES: Electronic brakes. WHEELS: The rear wheels are 3 x 9 inches and the front wheel is 2 x 8 inches and all wheels have pneumatic tires. Flat free tires are optional. OPTIONS: Safety flag, headlight, taillights, oxygen holder, crutch holders, and others. POWER: Uses two 12-volt sealed lead acid batteries (not included). The battery charger is built in and a battery charge gauge and charger outlet are located on the control box. SPEEDS: Maximum forward speed is 4.25 mile per hour and reverse speed is 2.5 miles per hour for a range of 12 to 15 miles per battery charge. An electronic speed control is included on the control box. CAPACITY: 250 pounds. WEIGHT: The rear section weighs 39 pounds, the seat weighs 23 pounds, and the front section weighs 20 pounds WARRANTY: Three year limited warranty.

  71. REVO 3 WHEEL Picture of REVO 3 WHEEL

    The Revo is a compact three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 43 x 21.5 inches with a 30.5-inch wheel base. The turning radius is 38 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 18 x 16 compact foldable molded plastic seat. The standard back height is 14 inches. The seat-to-deck height adjusts from 16.25 to 18.25 inches and the seat-to-ground height adjusts from 21.75 to 23.75 inches. The seat offers 360-degree rotation. A lap belt is optional. UPHOLSTERY: Black vinyl with a fabric center panel. ARMRESTS: Flip-up armrests are standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheel is 2 x 8 inches and the rear wheels are 3 x 9 inches. Solid tires are standard. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 4.5 miles per hour for a range of up to 20 miles. CAPACITY: 300 pounds. WEIGHT: 106.5 pounds without batteries. The heaviest piece when disassembled weighs 48 pounds. WARRANTY: Three-year limited warranty on the frame.

  72. REVO 4 WHEEL

    The Revo 4 Wheel is a compact four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 44.75 x 21.5. The turning radius is 50 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 18 x 16 compact foldable molded plastic seat. The standard back height is 14 inches. The seat-to-deck height adjusts from 16.25 to 18.25 inches and the seat-to-ground height adjusts from 23 to 25 inches. The seat offers 360-degree rotation. A lap belt is optional. UPHOLSTERY: Black vinyl with a fabric center panel. ARMRESTS: Flip-up armrests are standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheels are 2 x 8 inches and the rear wheels are 3 x 9 inches. Solid tires are standard. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries. An off-board battery charger is included. SPEEDS: 4.5 miles per hour for a range of up to 20 miles. CAPACITY: 300 pounds. WEIGHT: 125 pounds without batteries. The heaviest piece when disassembled weighs 51.5 pounds. WARRANTY: Three-year limited warranty on the frame.

  73. SHUTTLE

    The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel drive. SEAT (WxDxH): The padded swivel seat measures 17 x 17 x 17 inches. The seat height from the scooter floor is adjustable from 17 to 21 inches. Custom seat dimensions are available. UPHOLSTERY: Vinyl upholstery in blue, gray, or mauve is standard; fabric upholstery is optional. ARMRESTS: Flip-up padded, upholstered arms. BRAKES: Electronic. WHEELS: Three 4 x 10 inch wheels with pneumatic tires are standard. Flat-free tires and hubcaps are optional. OPTIONS: Crutch holders, front and rear baskets, cup holder, taillight, headlight, oxygen holder, rear bumper, and others. POWER: Uses two 12-volt gel/sealed lead acid batteries; the battery charger is included. SPEEDS: Maximum speed is 5 miles per hour (60 percent reverse) for a range of 20 miles. CAPACITY: 300 pounds. WEIGHT: When disassembled, the rear section weighs 49 pounds, the seat weighs 20 pounds, and the base and tiller weigh 32 pounds. WARRANTY: Three years on the frame and drive train and one year on electronics; an optional nationwide factory warranty on labor and house calls is available at an extra charge.

  74. SIDEKICK Picture of SIDEKICK

    The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel drive. SEAT (WxDxH): The padded swivel seat measures 17 x 17 x 17 inches. The seat height from the scooter floor is adjustable from 14.5 to 16.5 inches. Custom seat dimensions are available. UPHOLSTERY: Vinyl or fabric upholstery. ARMRESTS: Flip-up padded, upholstered arms. BRAKES: Electronic. WHEELS: One 2 x 8 inch front wheel and two 2.5 x 9 inch rear wheels with pneumatic tires are standard. Flat-free tires and hubcaps are optional. OPTIONS: Crutch holders, front and rear baskets, cup holder, taillight, headlight, oxygen holder, rear bumper, and others. POWER: Uses two 12-volt gel/sealed lead acid batteries; the battery charger is included. SPEEDS: Maximum speed is 4.5 miles per hour (60 percent reverse) for a range of 20 to 25 miles. CAPACITY: 300 pounds. WEIGHT: When disassembled, the rear section weighs 43 pounds, the seat weighs 23 pounds, and the base and tiller weigh 27 pounds. WARRANTY: Three years on the frame and drive train and one year on electronics; an optional nationwide factory warranty on labor and house calls is available at an extra charge.

  75. SONIC Picture of SONIC

    The Sonic is a lightweight three-wheeled scooter designed for indoor use by individuals with mobility disabilities. FRAME(LxW): 37 x 21 inches with a 28-inch wheel base. The turning radius is 34 inches and the ground clearance is 1.75 inches. The frame has disassembles into four parts for transport. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt direct drive transaxle rear-wheel drive. SEAT (WxD): 18 x 16 foldable molded plastic seat. The standard back height is 14 inches. The seat-to-deck height adjusts from 14 to 15 inches and the seat- to-ground height adjusts from 20 to 21 inches. A lap belt is optional. UPHOLSTERY: Charcoal fabric or vinyl. ARMRESTS: Standard. BRAKES: Electronic, regenerative, and electromechanical brakes. WHEELS: The front wheel is 2 x 7.5 inches and the rear wheels are 2.5 x 7.5 inches. Solid tires are standard. OPTIONS: Safety flag, forearm crutch holder, wishbone crutch holder, cane/crutch holder, quad cane holder, cup holder, oxygen tank holder, walker holder, rear basket, basket, and heavy-duty dust cover. POWER: Uses two 12-volt AGM or gel cell batteries with removeable battery pack. An off-board battery charger is included. SPEEDS: 4.25 miles per hour for a range of up to 10 miles. CAPACITY: 300 pounds. WEIGHT: 97 pounds without batteries. The heaviest piece when disassembled weighs 35 pounds. WARRANTY: Three-year limited warranty on the frame.

  76. VICTORY 10 3-WHEEL SCOOTER (MODEL SC610) Picture of VICTORY 10 3-WHEEL SCOOTER (MODEL SC610)

    The Victory 10 3-Wheel Scooter, model SC610, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.25 x 22.25 inches. The turning radius is 42 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18 or 20 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 3.5 x 10 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 15.5 miles on a single charge. CAPACITY: 400 pounds. WEIGHT: 176.5 pounds with batteries and 131.5 pounds without batteries. When disassembled, the heaviest piece is 54.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  77. VICTORY 10 4-WHEEL SCOOTER (MODEL SC710) Picture of VICTORY 10 4-WHEEL SCOOTER (MODEL SC710)

    The Victory 10 4-Wheel Scooter, model SC710, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 47x 22.25 inches. The turning radius is 54 inches and the ground clearance is 3 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18, 20 or 22 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 3.5 x 10 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 15.5 miles on a single charge. CAPACITY: 400 pounds. WEIGHT: 179.5 pounds with batteries and 132.5 pounds without batteries. When disassembled, the heaviest piece is 61 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  78. VICTORY 9 3-WHEEL SCOOTER (MODEL SC609) Picture of VICTORY 9 3-WHEEL SCOOTER (MODEL SC609)

    The Victory 9 3-Wheel Scooter, model SC609, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 40.25 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18 or 20 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch rear solid tires; and 8 inch front solid tire. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 166.5 pounds with batteries and 117.5 pounds without batteries. When disassembled, the heaviest piece is 48.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  79. VICTORY 9 4-WHEEL SCOOTER (MODEL SC709) Picture of VICTORY 9 4-WHEEL SCOOTER (MODEL SC709)

    The Victory 9 4-Wheel Scooter, model SC709, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 45.5 x 22.5 inches. The turning radius is 51.5 inches and the ground clearance is 2.25 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches sliding foldable molded plastic seat with foam inserts. Alternative seat dimensions with widths or depths of 16, 18, 20 or 22 inches. The back height is 14.5 inches; higher backs are available. UPHOLSTERY: Gray, beige or black vinyl; or gray or brown fabric. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch front and rear solid tires. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.25 miles per hour. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 180 pounds with batteries and 131 pounds without batteries. When disassembled, the heaviest piece is 45 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  80. VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS) Picture of VICTORY 9 PS 3-WHEEL SCOOTER (MODEL SC609PS)

    The Victory 9 PS 3-Wheel Scooter, model SC609PS, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 43.5 x 22.125 inches. The turning radius is 41 inches and the ground clearance is 2 inches. The scooter disassembles for transport. Body colors are candy apple red or viper blue. A basket and LED light mounted on the front of the tiller are standard. The top of the tiller has wraparound handles for steering. OPTIONS: Cup holder; rear view mirror; saddle bag; lap belt (50, 60 or 70 inches long); safety flag; oxygen tank holder; walker, cane or crutch holder; rear basket. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (DxW): 17 x 18 inches foldable molded plastic seat with foam inserts. The back height is 14.5 inches. The height of the seat is adjustable up to 6 inches using a standard powered elevating system. UPHOLSTERY: Black vinyl only. BRAKES: Dual braking system with electronic, regenerative disc brakes. WHEELS: 2.5 x 9 inch rear solid tires; and 8 inch front solid tire. All tires feature a non-scuffing surface. POWER: Uses two deep cycle 12-volt AGM or gel cell batteries, size U1 (included). The scooter includes an on-board battery charger. SPEEDS: 5.5 miles per hour; the maximum speed is reduced when the height of the seat is raised by 3 inches or more. The scooter has a range of 13 miles on a single charge. CAPACITY: 300 pounds. WEIGHT: 180 pounds with batteries and 131 pounds without batteries. When disassembled, the heaviest piece is 59.5 pounds. WARRANTY: Three year limited warranty on the structural frame; one year warranty on bearings, bushings, electronic assemblies and rubber and plastic components.

  81. WRANGLER (MODEL PMV 600) Picture of WRANGLER (MODEL PMV 600)

    The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear motors. SEAT (WxDxH): 18 x 16 x 20.5 (without headrest) inches. A high-back contoured seat with adjustable headrest is standard. The seat can slide forward and back, and it can be manually adjusted vertically. Seat to deck height is 19 to 23 inches; and seat to ground height is 27.75 to 31.75 inches. A power elevating seat is optional. UPHOLSTERY: Vinyl in beige or fabric in brown or charcoal gray. ARMRESTS: Flip-up, padded armrests. BRAKES: Electronic brakes; a rear drum brake is optional. WHEELS: Four 6 x 13 wheels with pneumatic tires. OPTIONS: A fully directional light package is available. POWER: Uses two 12-volt 100AH Group 27 deep cycle (AGM or gel cell) batteries (not included); the 5-amp onboard battery charger is included. SPEEDS: Variable speed up to 10 miles per hour with a range of up to 25 miles. CAPACITY: 400 pounds. WEIGHT: 216 pounds without batteries; 345 pounds with seat and batteries. WARRANTY: Three-year limited warranty.

  82. Z-CHAIR Picture of Z-CHAIR

    The Z-Chair is an adult powered wheelchair designed for indoor and outdoor use by adults with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 29 x 19 inches (without foot platform) with a 1.75-inch ground clearance and a 26.75-inch turning radius (with foot platform). This lightweight wheelchair has a limited suspension and a 3-inch rear anti-tips. The chair can be disassembled into 4 parts for easy transport. The chair is available in red and blue. CONTROLS: 40 amp PG GC2 joystick controller. RWD: Rear wheel drive. SEAT (WxD): 18 x 18 inches foldable seat. UPHOLSTERY: Gray vinyl and fabric. ARMRESTS: Standard. BRAKES: Electronic, regenerative disc brakes. CASTERS: 5-inch solid front casters are standard. WHEELS: 8-inch rear wheels with flat-free, knobby tires are standard. FOOTRESTS: A fixed foot platform is standard. Swing-away footrests, elevating footrests, and heel loops are optional. OPTIONS: Dust cover, cup holder, rear basket, saddle bag, oxygen tank holder, walker holder, stroller handle, and a cane/crutch holder. POWER: Uses two 12-Volt, 12-AHbatteries. An off-board 2 amp battery charger is included. SPEEDS: 3.5 miles per hour with a maximum range of 8 miles. CAPACITY: 250 pounds. WEIGHT: 102 pounds with standard seat and batteries; heaviest piece when disassembled for transport is 34.5 pounds. WARRANTY: 5-year limited warranty on the frame; 13-month limited warranty on electronics and drive motors.

See Pride Mobility Products Corporation products that are no longer available.

  • Home
  • Alternate Layout
  • My AbleData
  • Contact
  • Site Map
  • A-Z Index
  • Help
  • Privacy

    • AbleData, 8630 Fenton Street, Suite 930, Silver Spring, MD 20910. 1-800-227-0216.
    Maintained for the National Institute on Disability and Rehabilitation Research of the U.S. Dept. of Education
    by ICF Macro under Contract No. ED-04-CO-0018/0007.

    The records in AbleData are provided for information purposes only. Neither the U.S. Department of Education nor ICF Macro has examined, reviewed, or tested any product, device, or information contained in AbleData. The Department and ICF Macro make no endorsement, representation, or warranty express or implied as to any product, device, or information set forth in AbleData. The views expressed on this site do not necessarily represent the opinions of the Department of Education, the National Institute on Disability and Rehabilitation Research, or ICF Macro.