Products are listed alphabetically.

Page 1 of 3    Next page »

1. ACTION PRO, ACTION PRO-SA & ACTION PRO-T The Action Pro Series wheelch are manual drive sport wheelchairs for individuals with mobility disabilities. FRAME: Rigid aluminum frame available in a choice of colors. Anti-tips are optional. SEAT: Seat width from 14 to 20 inches in 1-inch increments; seat depth ranges from 14 to 18 inches in 1-inch increments; the seat height is adjustable in ranges from 8 to 12 inches, 10 to 14 inches, 14 to 18 inches, and 16 to 20 inches. The fold-down backrest angle adjusts from 0 to 8 degrees. Optional p...[More Information]
   
   
2. ACTION TRACKCHAIR (MODEL SM) The Action Trackchair, model SM, is a powered sport wheelchair designed for use by children and adults of short stature with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x 33 x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each sid...[More Information]
   
   
3. ACTION TRACKCHAIR (MODEL ST) The Action Trackchair, model ST, is a powered sport wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This wheelchair is designed for off-road use, and it features a pair of caterpillar tracks instead of wheels. It has a turning radius of zero. FRAME (LxWxH): 42 x (37, 39, 41 or 43) x 38 inches. Length is 48 inches with rear idlers. The ground clearance is 3.5 inches. There are two accessory holders on each side of the chair...[More Information]
   
   
4. ATB-ULTIMATE The ATB-Ultimate is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches magnesium alloy powder coat frame. Frogs Legs rear elastic-polymer suspension is standard. The rear axel center of gravity is adjustable. The frame also had an adjustable angle push bar and custom cut aluminum side guards. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches i...[More Information]
   
   
5. BALLER ELITE The Baller Elite is a sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Aluminum side guards are standard. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest is welded and non-folding. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: ...[More Information]
   
   
6. BARRETT METEOR The Barrett Meteor is a lightweight, sports wheelchair designed for everyday and leisure pursuits. FRAME: 28 x 27 x 9 inches folded size; tubular alloy steel; full gloss stove finish. SEAT: 16 x 16 inch. BRAKES: Lever assembly. WHEELS: 24 inch. CAPACITY: 224 pounds. WEIGHT: 31.5 pounds. Several accessories are also available....[More Information]
   
   
7. BT The BT is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: Frogs Legs Ultra ...[More Information]
   
   
8. BT-ATB The BT-ATB is a rough terrain sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 8 to 20 inches in 1-inch increments. The backrest angle is adjustable from 90 to 100 degrees, and there is a 7075 aluminum CNC water-jet cut backrest plate. UPHOLSTERY: Laminated carbon fiber sail...[More Information]
   
   
9. BT-BALLISTIC The BT-Ballistic is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features custom machined billet down tubes and axel cross bar and a mirror polish finish to echo motorcycle styling. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle ...[More Information]
   
   
10. BT-G TRIBAL The BT-G Tribal is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. The frame features 6061 T6 CNC machined tribal-themed cutouts. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest angle is adjustable from 80 to 100 degrees. UPHOLSTERY: Laminated carbo...[More Information]
    
    
11. BT-MG The BT-Mg is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated carbon fiber sailcloth adjustable by tension cord. CASTERS: 3.25...[More Information]
    
    
12. BT-MG-A The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 aluminum with a water jet cut. UPHOLSTERY: Laminated car...[More Information]
    
    
13. BT-MG-AS The BT-Mg-A is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 16 x 16 inches. Magnesium alloy powder coat frame with 1.375-inch tubing. Frogs Legs rear elastic-polymer suspension is standard. The center of gravity is adjustable in .5-inch increments. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is available from 5 to 20 inches in 1-inch increments. The backrest plate is made of 7075 ...[More Information]
    
    
14. BT-TRAIL The BT-Trail is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for outdoor use on unpaved surfaces. To enhance stability, the BT-Trail’s design features a wider distance between the casters, and the casters are positioned forward to be even with the footrest to create a longer wheelbase. FRAME (LxW): 16 x 16 inches. 6061 T6 aluminum powder coat frame with 1.5-inch tubing. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 1...[More Information]
    
    
15. BT-X The BT-X is a lightweight sport wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. It is intended for indoor and outdoor use on a variety of terrains, including unpaved paths and beaches. To facilitate this versatility, the BT-X is designed to fit multiple wheels and casters in addition to those include with the standard model. FRAME: Aluminum alloy frame and forks. SEAT (WxD): 14, 15, 16, 17 or 18 x 14, 15, 16, 17 or 18 inches. Backrest height is availa...[More Information]
    
    
16. CROSS-SPORT The Cross-Sport is a sport wheelchair designed for everyday use and use in occasional sporting events. FRAME: Lightweight, rigid titanium frame. WEIGHT: 15 pounds....[More Information]
    
    
17. CROSS-SPORT C The Cross-Sport C is a custom-designed sport wheelchair designed for everyday use and use in occasional sporting events. This chair enables the consumers to select the exact specifications and accessories desired for the chair. FRAME: Lightweight, rigid titanium frame with a fixed center of gravity. SEAT: Tapered seat. WEIGHT: 15 pounds....[More Information]
    
    
18. CUSTOM BASKETBALL WHEELCHAIR The Custom Basketball Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Each wheelchair is custom built to individual specifications for size, rake and camber. FRAME: Aluminum (standard) or titanium (optional); fixed camber bars from 10 to 20 degrees; rear anti-tips; powder coat finish. SEAT: Adjustable back height (standard). Options include adjustable tension seat back; alloy seat base; waist strap; back bar c...[More Information]
    
    
19. CUSTOM LAWN BOWL WHEELCHAIR The Custom Lawn Bowl Wheelchair is a sports wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Built to comply with lawn bowls regulations for using wheelchairs on the green, this wheelchair is custom built to the user's specifications for size, rake and camber. The low ride height puts the user closer to the green, and the wide castor positions allow the user's feet to clear the castor wheels. Wheel/frame offsets can be built in to he...[More Information]
    
    
20. CUSTOM TENNIS WHEELCHAIR The Custom Tennis Wheelchair is a sports wheelchair intended for individuals with lower extremity or mobility disabilities or spinal cord injury. The strong lightweight frame is configured to allow adjustment of the seat for comfort while playing tennis. FRAME: Each frame is built to individual specifications for size, rake and camber. Oval aero tubing is used extensively throughout the frame for increased lateral strength. Rolled oval tubing under the seat sling allows the use of an adjustable ...[More Information]
    
    
21. CYCLONE ADVANTAGE 4 The Cyclone Advantage 4 is an adult manual wheelchair designed for use by individuals with lower extremity or mobility disabilities and spinal cord injury. The chair is adjustable for use in everyday life or as a sport wheelchair, with a low and maneuverable configuration for tennis or a high and stable configuration for basketball. FRAME: Hand-built adjustable frame. SEAT: The seat height can be raised and lowered without changing the backrest angle....[More Information]
    
    
22. CYCLONE ENIGMA The Cyclone Enigma is a lightweight sport wheelchair designed for use by individuals with lower extremity and mobility disabilities or spinal cord injury. The chair is available in rugby or basketball configurations. FRAME: Manufactured from aluminium alloy or titanium aerospace alloy tubing....[More Information]
    
    
23. CYCLONE MTM 7020 The Cyclone MTM (Made To Measure) 720 is a lightweight manual wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME: Handbuilt frame made from 7020 aluminium alloy, with adjustable camber bar and choice of frame color. Optional one arm drive. CUSHION: Choice of cushion thickness. UPHOLSTERY: Fabric or leather upholstery; leather upholstery is available in black or red. BRAKES: Choice of brakes. CASTERS: Choice of caster size and sty...[More Information]
    
    
24. CYCLONE PRO-COMPETITION (MODELS PC HT & PC TI 325) The Cyclone Pro-Competition is a sport wheelchair designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME: Available in high tensile aluminium alloy (model P CHT) or titanium aerospace alloy (model PC Ti 325). SEAT: Tapered seat for leg stability. The chair is available with a high frame for basketball or low seating for rugby and tennis. CASTERS: Wide caster positions to prevent picking....[More Information]
    
    
25. ECLIPSE The Eclipse is a manual sport wheelchair that is both lightweight (16 lbs. base weight) and strong (made of alloy materials of aerospace quality). FRAME: Frame is provided with an 85 degree front end to enhance mobility with a reduced turning radius. SEAT DEPTH: 10 to 15 inches. SEAT WIDTH: 10 to 20 inches. SEAT HEIGHT: 8 to 16 inches. BACKREST: Folding or non- folding, 8 to 16 inches high, 10 to 20 inches wide. Folding design allows adjustment, upright locking, and folding within one mechanism....[More Information]
    
    

Page 1 of 3    Next page »