Wheelchair Accessories

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)

"t"tube-Plate Weldment (Models 1521, 1521-01, 1522, & 1522-01)
Description: 

The "T" Tube-Plate Assembly Weldment is headrest accessory interface hardware designed for positioning an Occipital Angle Bar or an Occipital "T" Bar on a wheelchair.

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)

"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)
Description: 

The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs.

"z" Tray Slide Bracket Attaching System (Model 32799)

"z" Tray Slide Bracket Attaching System (Model 32799)
Description: 

The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front.

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)

10 Inch Slide Mounting Kit (Models 3624 & 3624-01)
Description: 

The 10 Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair.

10-Inch Scooter Bag (Model 70300)

Description: 

The 10-inch Scooter Bag, model 70300, is a carrying bag for three-wheel scooters designed to hang from the handlebars on the tiller. This bag features a spring action hex frame opening to allow easy access to all items in the pouch.

13-Inch Armrest Bag (Model 70320)

Description: 

The 13-inch Armrest Bag, model 70320, is a wheelchair side pouch designed for use on three-wheeled scooters. The caddy attaches to the arms using side release clips.

13-Inch Sling Bag

Description: 

The 13-inch Sling Bag, model 70040, is an underseat pocket designed to provide easy access and an unobstructed view of any items stored in this carrying bag to manual wheelchair users.

2-Piece Wheelchair Belt (Model 63000)

Description: 

DISCONTINUED (Verified 11/2001) RETAINED IN DATABASE FOR REFERENCE. The 2-Piece Wheelchair Belt (no. 63000) is a wheelchair seatbelt with a quick-release aircraft buckle. The belt is provided in two pieces for easy attachment.

Maker: 

24 Inch Pneumatic Tired Wheel (Model 0524)

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Pneumatic tire on 24 inch or 61 centimeter wheel.

24 Inch Pneumatic Tyred Wheel (Model 0524Pt)

Description: 

DISCONTINUED. RETAINED IN DATABASE FOR REFERENCE. Twenty-four inch or 61 centimeter pneumatic tire and wire spoke wheel.

3D printed wheelchair Hand Drive

3D printed wheelchair Hand Drive
Description: 

The Hand Drive wheelchair attachment is a prototype that can be attached to any wheelchair and allows it to be powered in a rowing motion.

Seller(s): 

3Rd Hand Small Electronics Mount

3Rd Hand Small Electronics Mount
Description: 

The 3rd Hand Small Electronics Mount is an extension arm for wheelchair accessories designed for use by individuals with mobility or neurological disabilities or spinal cord injury.

4 Ch Control System With Brake & 6 Ch Control System With Brake (Model Dlt & Dlt-X)

Description: 

DISCONTINUED. (Verified 08/04) RETAINED IN DATABASE FOR REFERENCE.

4 D Lapboard Adjustable Bracket Mount (08-3000 Series)

Description: 

Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00).

4007 Recliner Controller (Model Tcs-14940)

Description: 

DISCONTINUED. (Verified 3/2004) RETAINED IN DATABASE FOR REFERENCE. Variable speed controller for power reclining systems. Can power any 24 volt recliner motor. "Soft" start and stop and finite speed control.

6-Seater Picnic Table- Fits 1 Wheelchair

6-Seater Picnic Table- Fits 1 Wheelchair
Description: 

This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for a wheelchair to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified.

6650 Half Mask

6650 Half Mask
Description: 

The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest.

6917 Non-Stomp-Down-Able Heel Loops

6917 Non-Stomp-Down-Able Heel Loops
Description: 

The 6917 Non-Stomp-Down-Able Heel Loops are flexible polyethylene strap designed to provide an alternative to webbed heel straps on wheelchair footrests. An ankle strap is included for maintaining foot placement, as well as attachment screws.

7 Inch Slide Mounting Kit Models 3621 & 3621-01)

7 Inch Slide Mounting Kit Models 3621 & 3621-01)
Description: 

The 7-Inch Slide Mounting Kit is is headrest accessory hardware designed to attach the headrest, the occipital ring, and their interface hardware to the back of a wheelchair.

7901 Hensinger Covers

7901 Hensinger Covers
Description: 

The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large.

Translate

English French German Italian Portuguese Russian Spanish