New Products on AbleData

CanTUBE® for Scooters
Description:

The CanTUBE® for Scooters is designed for cane users and those with mobility impairment. The cane holder attaches to scooters and power chairs without tools. Fits seat backs of all kinds: power chairs, scooters, wheelchairs, golf carts, tractors, and more. Straps on with two buckles and adjusts in seconds. Unlike fabric, this rigid TUBE cane holder makes cane transfer easy.

CaneTUBE® Cane Holder
Description:

The CaneTUBE® Cane Holder is designed for cane users and those with mobility impairment. The cane is snap-on design provides a convenient way to bring a cane when using a walker or rollator. It attaches to common mobility devices, even 3 wheelers. It is portable so the user can take it off one walker and put it on another. Also stays on even when the walker or rollator is folded.

Practical Ideas That Really Work for Students With Autism: High Functioning Autism
Description:

Practical Ideas That Really Work for Students With Autism: High Functioning Autism is a book and a CD-ROM for children Grade 3 - 12 that offers a range of ideas designed for teachers to help them improve the social interactions and communication skills of students with autism spectrum disorder (ASD). Contains 40 practical, easy-to-use classroom ideas. linked to specific DSM-5 criteria for ASD...

 Hi-Lo Changing Tables
Description:
The Hi-Lo Changing Tables are products designed caregivers to use while accommodating children with special needs. One section top piece and side rails pivot down for easy transfer and access. Motorized tables lower effectively to 18 inches above the floor for easy access, allowing transfer with little assistance. Helps eliminate back strain and pain from lifting and transferring students/...
Quicklift Bath Aid Lifting Devices
Description:
The Quicklift Bath Aid Lifting Devices are aids for daily living designed for people who need assistance while transferring. The Bath Aid Lifting Devices are both lightweight and portable. With them, a caregiver can safely lower and lift a child in a bath chair in and out of the bathtub. The child can be attended to without unnecessary back strain, first in the bath lift’s upper position at the...
Woodscan Barcode Reader for Milestone 312
Description:

The Woodscan Barcode Reader for Milestone 312 is a barcode reader designed for low vision persons to be used with the Milestone 312. It can be used for blind and visually impaired users to help identify products. It can connect via USB with the Milestone 312 and it recognizes products by their barcodes. It speaks the product information aloud.​ This external scanner turns the Milestone 312...

Hole in One Fork and Spoon
Description:

The Hole in One Fork and Spoon is a set of eating utensils designed for people with limited hand mobility to use. The handles on these eating utensils provide several grasping positions. Fingers can be inserted through the hollow center or wrapped around the outside. The eating utensils are attached to the handle by a swivel screw that allows the utensil to fold back on the handle when not in...

iGuardStove
Description:

The iGuardStove is a motion based stove fire prevention solution for individuals with cognitive or memory disabilities or Alzheimer's disease. The device senses when users have left the kitchen area, and begins a countdown timer gives the user 5 minutes to return to the kitchen or it will turn the stove off.  Once it sees that the user has returned to the kitchen it automatically turns the...

Maker: iGuardFire
Seller(s): iGuardFire
Flexi-Cut Cups
Description:

The Flexi-Cut Cups are designed for people with motor disabilities to help promote proper cup drinking during initial independent drinking. Generously cut-out rims help children who are beginning to self-drink, are limited in oral-motor skills and range of motion, or need assistance in drinking. The cut-out design of these flexible plastic cups promotes drinking without neck extension. Cups...

Superactive LED Bubble Tubes
Description:

A Bubble Tube is a key component of a sensory room, providing a visual filter for incoming sensory overload. The combination of ever-changing bubbles and colors creates of calming and relaxing for overactive individuals or stimulating withdrawn individuals. Watching bubbles in action helps visual development and perception, color recognition, and communications skills. 

Bubble tubes...

Portable LED Bubble Tube
Description:

The Portable LED Bubble Tube is a bubble tube that can grab the attention of a user with its mesmerizing and colorful effects. People with a variety of sensory disorders can benefit from a bubble tube as they encourage visual development and perception, and communication skills. The combination of ever-changing bubbles and colors can be calming and relaxing for overactive individuals or...

Bubble Tube Mirrors
Description:

Bubble Tube Mirrors are a tool made for use by children with neurological disabilities to provide visual stimulation. Mirrors provide multiple reflections of the bubble tube making it seem like there are more bubble tubes, and greatly enhance the calming light emanating from the bubble tube. Will not shatter, for a safe alternative to glass. Sold as a pair, for mounting in a corner, and...

Interactive Switch Box Bubble Tube Controller
Description:

The Interactive Switch Box Bubble Tube Controller is a versatile interactive controller for individuals with Autism spectrum and other neurological disorders designed to convert pre-programmed bubble tubes into interactive units. It offers valuable-speed color change, single-switch selection, and bubble-flow inhibition with easy-to-push red, blue, green, yellow, and orange buttons.

 
FISH WINCH® Spinning
Description:

The FISH WINCH® Spinning is an adaptive fishing reel that is designed for use by individuals with upper extremity, grasping disabilities, or spinal cord injury. The fishing reel system allow for easy one-handed casting and retrieving. The electric spinning reel drives are cordless, easy to use, weigh 10 ounces. They are available in 3 retrieve speeds for various styles of fishing and lure...

Maker: FISH WINCH
Seller(s): FISH WINCH
EAZ Disabled Mobility Device
Description:

The EAZ Disabled Mobility Device concept eliminates the discomfort and disregard of riding a wheelchair that usually physically disabled persons experience. The mobility device is a combination of a wheelchair and a walker designed for people with moderate disabilities who find it difficult getting around. These users include; the injured and people recovering from an operation to the frail,...

Seller(s): Custom Prototype
Cursum Stroller
Description:

The Cursum Stroller is a baby stroller for wheelchair users by designer Cindy Sjöblom, designed to overcome the added challenge a mobility disability adds to early parenting in the first stages of infancy. The Cursum stroller concept aims to make life a little easier by adapting to use in tandem with a wheelchair. Swivel wheels, complete height adjustment, attention to comfort and visibility...

Seller(s): Custom Prototype
Independent Wheelchair Assistant (IWA)
Description:

The Independent Wheelchair Assistant (IWA) is a device to help wheelchair user's who constantly need to transfer from one device to another. The design utilizes the user’s own wheelchair, acting as a true assistant and eliminating the need to constantly transfer between other devices like scooters or power chairs. The user attaches to the device from the rear via a small bracket that must be...

Seller(s): Custom Prototype
Solo Wheelchair
Description:

The Solo Wheelchair is a wheelchair prototype that combines the advantages of manual and electrical wheelchairs. With an electrical assist system, Solo increases the range and mobility of a manual wheelchair while providing premium ergonomics and compact foldability. Heavily focused on aesthetics, Solo avoids the medical the user and the gives a feel often associated with electrical...

Seller(s): Custom Prototype
Catapult
Description:

The Catapult is a lever drive wheelchair designed for people with balance disabilities. It a prototype that uses both the upward and downward motion of the levers to move the chair forward. The brake is on the right handle and the gear shift is attached to the left handle, which brakes both back wheels simultaneously. The steering for the wheelchair is controlled via the user’s feet offering...

Seller(s): Custom Prototype
Nimbl
Description:

Nimbl is a wheelchair prototype concept designed specifically for domestic/indoor use to give increased access without sacrificing mobility inside a house. It features a carbon fiber tub which houses the 10-inch lift actuator, motorized hubless wheels and interchangeable battery. The wheelchair also integrates a magnetically placed armrest remote that allows both right- and left-handed control...

Seller(s): Custom Prototype
Mobi Electric Folding Wheelchair
Description:

The Mobi Electric Folding Wheelchair a compact electric wheelchair prototype that can fold into itself within the diameter of its wheels. It is made of lightweight materials and functions as a manual wheelchair, yet at the base of the wheels, there is a battery-powered mechanism to help move the wheels forward or backward. Gyroscope technology keeps the two-wheeled chair balanced.

Seller(s): Custom Prototype
Comb Multifolding Wheelchair
Description:

The Comb Multifolding Wheelchair is prototype meant to be fully adjustable and functional. This concept wheelchair can be adjusted for the user’s comfort, needs, and even folded down to a tiny compact size that would fit any small vehicle for transportation.

Maker: Rudolf Mihu
Seller(s): Custom Prototype
Permobil X850 Corpus
Description:

The Permobil X850 Corpus All-Terrain Power Wheelchair is an offroad wheelchair designed for cross-country use in all weather. With rear-wheel drive, a powerful motor, and robust suspension this is a wheelchair which users can safely drive at 15 kilometers/hour.

The powerful offroad-wheelchair is built for people who demand high performance. The chair is equipped with ESP (Electronic...

Maker: Permobil Usa
Lime Cycle
Description:

The Lime Cycle is a prototype meant for commuters with walking disabilities or amputee. The concept is to have a basic wheelchair used for indoor or short distance movement and with the help of a front attachment, be able to travel as a handcycle to medium distances. The Lime Cycle experiments with how a wheelchair can be made modular so that by adding an extension, it can be converted into a...

Seller(s): Custom Prototype
CTC 41
Description:

The CTC 41 (Cradle to Cradle) is a wheelchair prototype. This manual wheelchair features a honeycomb pattern that is extremely strong yet lightweight. The CTC 41 folds up like other collapsible chairs. The prototype includes personalization in wheel colors, frame colors, and even a special edition clear wheelchair.

Seller(s): Custom Prototype

Translate

English French German Italian Portuguese Russian Spanish